Analytical Chromatography
- Сортировать:
- Вид таблицей
-
Amberlite® IRA-410 chloride form
CAS Number: 63181-94-2 MDL number: MFCD00132710 NACRES: SB.52
Кат. номер 216569-500G 216569-100G General descriptionAmberlite IRA-410, anion exchange resin, is an effective catalyst especially for those reactions involving low catalyst concentrations and relatively low temperature. Amberlite IRA-410 is a gel-type resin having styrene-divinyl-benzene skeletal structure.ApplicationAmberlite IRA-410 was used as packing material for columns. Amberlite IRA-410 was also used in urinary analysis by HPLC.
Strongly basic (type II) anion exchange resin for water conditioning, removing iodine ions, neutralization of solutions, capturing xanthan and xanthene dyes, etc.; better regeneration efficiency than type I base resin.Packaging100, 500 g in poly bottleFeatures and BenefitsStrongly basic gel-type resin with benzyldimethyl(2-hydroxyethyl)ammonium functionality chloride ion form useful in catalytic applications.Legal InformationAmberlite is a registered trademark of The Dow Chemical Company or an affiliated company of DowПараметрыQuality Level 200 vapor density <1 (vs air) vapor pressure 17 mmHg ( 20 °C) form beads autoignition temp. 800 °F parameter 40 °C OH- form max. temp., 77 °C Cl- form max. temp. moisture 45-51% application(s) LPLC: suitable matrix styrene/divinylbenzene matrix active group benzyldimethyl(2-hydroxyethyl)ammonium functional group particle size 20-25 mesh, 600-750 µm operating pH 0 - 14 capacity 1.25 meq/mL by wetted bed volume separation technique anion exchange InChI 1S/C13H20NO.C10H10.ClH/c1-4-12-7-5-6-8-13(12)11-14(2,3)9-10-15;1-3-9-7-5-6-8-10(9)4-2;/h4-8,15H,1,9-11H2,2-3H3;3-8H,1-2H2;1H/q+1;;/p-1 InChI key DPRMXNMXCFHCAS-UHFFFAOYSA-M
Safety InformationPersonal Protective Equipment dust mask type N95 (US), Eyeshields, Gloves RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Amberlite® IRA-67 free base
CAS Number: 65899-87-8 MDL number: MFCD00145567 NACRES: SB.52
Кат. номер 476633-100G 476633-1KG 476633-500G General descriptionAmberlite IRA 67 is a weakly basic anion exchange resin with high capacity for large organics.ApplicationWeakly basic anion exchange resin with an unusually high capacity for large organics. Common applications include: deacidification, deionization of process liquors, isolation of acidic natural products, purification of novabiacin and cephalosporins, separation of neutral and acidic amino acids below pH 10, removal of heparinic acid at low pH, concentration of citric acid, and demineralization of cheese whey.
Amberlite IRA 67 was used to determine the suitability for lactic acid.Packaging100 g in poly bottle
1 kg in poly bottlePhysical formWeakly basic gel, tertiary amine functionalityOther NotesPreviously known as IRA-68.Legal InformationAmberlite is a registered trademark of The Dow Chemical Company or an affiliated company of DowПараметрыQuality Level 100 form beads moisture ~60% application(s) LPLC: suitable matrix Acrylic (gel) matrix active group tertiary amine particle size 500-750 µm capacity 1.6 meq/mL by wetted bed volume separation technique anion exchange InChI 1S/C12H18O3.C10H10.C8H16N2O/c1-3-5-7-13-9-11-15-12-10-14-8-6-4-2;1-3-9-7-5-6-8-10(9)4-2;1-4-8(11)9-6-5-7-10(2)3/h3-4,9-12H,1-2,5-8H2;3-8H,1-2H2;4H,1,5-7H2,2-3H3,(H,9,11)/b11-9+,12-10+;; InChI key ZGXNLYRRYYOMNG-JDDKLYJPSA-N
Safety InformationPersonal Protective Equipment Eyeshields, Gloves, type N95 (US) RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Amberlite® IRA-900 chloride form
MDL number: MFCD00132712 PubChem Substance ID: 329752189
Кат. номер 216585-100G 216585-500G General descriptionAmberlite® IRA-900 chloride form is a macroporous, polystyrenic type 1 resin. This resin was found to catalyze the photodecomposition of carbon tetrachloride in ethanol.ApplicationStrongly basic (type I) anion exchange resin for decolorizing intermediate to light solutions, concentrating heparin at neutral pH, removing metal ions, etc.
Amberlite® IRA-900 modified with metallophthalocyanines was used to remove 4-nitorphenol.Packaging500 g in poly bottleFeatures and BenefitsStrongly basic, macroreticular resin of moderately high porosity with benzyltrialkylammonium functionality which is useful in decolorizing and removal of organic materials.Legal InformationAmberlite is a registered trademark of The Dow Chemical Company or an affiliated company of DowПараметрыQuality Level 100 vapor density <1 (vs air) vapor pressure 17 mmHg ( 20 °C) form beads crosslinking >95 % cross-linked autoignition temp. 800 °F parameter 60 °C OH- form max. temp., 77 °C Cl- form max. temp. moisture 58-64% application(s) LPLC: suitable matrix styrene-divinylbenzene (macroreticular) matrix active group quaternary ammonium particle size 650-820 µm operating pH 0 - 14 capacity 1.0 meq/mL by wetted bed volume separation technique anion exchange
Safety InformationPersonal Protective Equipment Eyeshields, Gloves, type N95 (US) RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Amberlite® IRA-96 free base
CAS Number: 39409-19-3 MDL number: MFCD00166430 NACRES: SB.52
Кат. номер 6441-1KG 6441-VAR 6441-250G ApplicationWeakly basic anion exchange resin, useful for deionization, chromate recovery, formaldehyde deacidification, ammonium nitrate removal and recovery. Does NOT meet FDA Food Additive Regulation 21 CFR 173.25.Legal InformationAmberlite is a registered trademark of The Dow Chemical Company or an affiliated company of DowПараметрыdescription weakly basic form beads parameter 100 °C max. temp. moisture 57-63% application(s) LPLC: suitable matrix styrene-divinylbenzene (macroporous) matrix active group polyamine functional group particle size 20-27 mesh, 550-750 µm operating pH 0 - 7 capacity 1.25 meq/mL by wetted bed volume separation technique anion exchange
Safety InformationPersonal Protective Equipment Eyeshields, Gloves, type N95 (US) RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable 199,52 € / 18 752 ₽Получить предложение -
Amberlite® IRA402 chloride form
CAS Number: 52439-77-7 MDL number: MFCD00145564 NACRES: SB.52
Кат. номер 6466-1KG 6466-VAR 6466-250G ApplicationStrongly basic (type I) anion exchange resin for water conditioning, removal of weakly acidic contaminants. Chemically the same as Amberlite® IRA400, but with lower crosslinkage to give better diffusion rates with large organics.Legal InformationAmberlite is a registered trademark of The Dow Chemical Company or an affiliated company of DowПараметрыdescription strongly basic form beads parameter 60 °C OH- form max. temp., 77 °C Cl- form max. temp. cross-linkage 6% moisture 49-60% application(s) LPLC: suitable loss ~55% loss on drying, 110 °C matrix styrene-divinylbenzene (gel) matrix active group quaternary ammonium functional group particle size 20-25 mesh, 600-750 µm operating pH 0 - 14 capacity 1.2 meq/mL by wetted bed volume separation technique anion exchange
Safety InformationPersonal Protective Equipment dust mask type N95 (US), Eyeshields, Gloves RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Amberlite® IRA743 free base
CAS Number: 63181-98-6 MDL number: MFCD00132701 NACRES: SB.52
Кат. номер 216445-250G 216445-1KG General descriptionAmberlite® IRA743 free base is of styrenic, macroreticular form.Packaging250 g in poly bottle
1 kg in poly bottleApplicationBorate-specific chelating resin for the removal of borate, boric acid, other boron species from water; highly selective so that salts, including bases, do not interfere significantly.Features and BenefitsWeakly basic resin with N-methylglucaomine functionality which is useful in boron-specific applications.Legal InformationAmberlite is a registered trademark of The Dow Chemical Company or an affiliated company of DowПараметрыQuality Level 100 vapor density <1 (vs air) vapor pressure 17 mmHg ( 20 °C) description weakly basic anion exchange resin form beads autoignition temp. ~800 °F moisture 48-54% application(s) LPLC: suitable matrix styrene-divinylbenzene (macroporous) matrix active group N-methylglucamine (free base form) functional group particle size 500-700 µm capacity 0.7 meq/mL by wetted bed volume separation technique affinity InChI 1S/C16H25NO6.C10H10/c1-3-10-6-4-5-7-11(10)8-17(2)16(23)15(22)14(21)13(20)12(19)9-18;1-3-9-7-5-6-8-10(9)4-2/h3-7,12-16,18-23H,1,8-9H2,2H3;3-8H,1-2H2/t12-,13-,14+,15-,16?;/m1./s1 InChI key STVMLWQMXHXTJS-ULVCUCBLSA-N
Safety InformationPersonal Protective Equipment Eyeshields, Gloves, type N95 (US) RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Amberlite® IRA910 chloride form
CAS Number: 37264-66-7 MDL number: MFCD00145799 NACRES: SB.52
Кат. номер 6457-1KG 6457-VAR 6457-250G ApplicationStrongly basic (type II) anion exchange resin for water conditioning and deionization, removal of sulfuric acid and color, etc. The type II base provides improved regeneration efficiency over type I base resin.Legal InformationAmberlite is a registered trademark of The Dow Chemical Company or an affiliated company of DowПараметрыform beads parameter 40 °C OH- form max. temp., 77 °C Cl- form max. temp. moisture 54-61% application(s) LPLC: suitable loss ~55% loss on drying matrix styrene-divinylbenzene (macroreticular) matrix active group dimethylethanolamine functional group particle size 530-800 µm operating pH 0 - 14 capacity 1.0 meq/mL by wetted bed volume separation technique anion exchange
Safety Informationpictograms GHS07 signalword Warning hcodes H315 - H319 pcodes P302 + P352 - P305 + P351 + P338 Personal Protective Equipment dust mask type N95 (US), Eyeshields, Gloves RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Amberlite® IRA958 chloride form
CAS Number: 79620-27-2 MDL number: MFCD00211600 NACRES: SB.52
Кат. номер 6478-VAR 6478-250G General descriptionAmberlite® IRA958 is a strongly basic polyacrylic anion exchange resin.ApplicationAcrylic resin for decolorization and the removal of organic material
Amberlite® IRA958 chloride form may be used as an ion exchange resin for the adsorption of Acid Orange 7, and sorption as well as separation of iminodiacetate rare earth element(III) complexes from aqueous solutions. Amberlite IRA958 may be used as an anion exchanger for the removal of natural organic matter (NOM) from drinking water supplies and palladium(II) from acidic solutions.
Strongly basic (type I) anion exchange resin for organic scavenging from surface water. Useful for decolorizing sugar juices and cane syrups, citric acid purification, and capturing metal complexes. The high porosity of the macroreticular structure makes it more resistant to organic fouling when compared to acrylic gel resins.Legal InformationAmberlite is a registered trademark of The Dow Chemical Company or an affiliated company of DowПараметрыdescription strongly basic form beads parameter 79 °C Cl- form max. temp. moisture 66-72% application(s) LPLC: suitable loss ~70% loss on drying, 110 °C matrix acrylic copolymer (macroreticular) matrix active group quaternary ammonium functional group particle size 13-45 mesh operating pH 0 - 14 capacity 0.8 meq/mL by wetted bed volume(Cl- form) bulk density 45 lb/cu.ft separation technique anion exchange
Safety InformationPersonal Protective Equipment dust mask type N95 (US), Eyeshields, Gloves RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable 648,00 € / 60 903 ₽Получить предложение -
Amberlite® IRC120 H, hydrogen form
CAS Number: 39389-20-3 MDL number: MFCD00132707 NACRES: SB.52
Кат. номер 6428-1KG 6428-VAR 6428-250G 6428-5KG General descriptionAmberlite IR120 is a gel-type strongly acidic cation exchange resin and a heterogeneous catalyst.ApplicationStrongly acidic cation exchange resin suitable for a wide variety of chemical process applications, removal of amino acids at low pH, USP potassium methods, etc..
Amberlite IR120 has been used as a catalyst support to form chelates with Co2+ or Ru3+ ions for subsequent hydrogen generation by hydrolysis of ammonia borane. It may be used as a catalyst for the oxirane ring-opening reaction effected by hydrogen peroxide (H2O2) during the synthesis of epoxides from triglycerides source. Amberlite IR120 hydrogen form may be used to investigate the ion-exchange equilibria of H+/Pb2+, H+/Ni2+, and H+/Cr3+ systems.Legal InformationAmberlite is a registered trademark of The Dow Chemical Company or an affiliated company of DowПараметрыvapor density >1 (vs air) vapor pressure 17 mmHg ( 20 °C) form beads autoignition temp. 800 °F parameter 121 °C max. temp. cross-linkage 8% moisture 53-58% application(s) LPLC: suitable loss ~50% loss on drying, 110 °C matrix styrene-divinylbenzene (gel) matrix active group sulfonic acid particle size 620-830 µm operating pH 0 - 14 capacity 1.8 meq/mL by wetted bed volume separation technique cation exchange InChI 1S/C10H10.C8H8O3S/c1-3-9-7-5-6-8-10(9)4-2;1-2-7-5-3-4-6-8(7)12(9,10)11/h3-8H,1-2H2;2-6H,1H2,(H,9,10,11) InChI key SIWVGXQOXWGJCI-UHFFFAOYSA-N
Safety InformationPersonal Protective Equipment dust mask type N95 (US), Eyeshields, Gloves RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Amberlite® IRN78 OH hydroxide form 10343-U
CAS Number: 11128-95-3 NACRES: SB.52 General descriptionAmberlite IRN78, strong base anion exchange gel type polystyrene resin in hydroxide form, has quaternary ammonium functional group.
As a nuclear grade resin, a minimum of 95% of the available exchange sites are in the hydroxide form.ApplicationAmberlite IRN78 hydroxide form was used as packing bed in vertical column chromatography.
Strongly basic (type I) anion exchange resin for water treatment, RADwaste, decontamination, etc.; useful for boron thermal regeneration.Legal InformationAmberlite is a registered trademark of The Dow Chemical Company or an affiliated company of DowПараметрыQuality Level 100 grade nuclear grade form beads packaging bucket of 500 g parameter 60 °C OH- form max. temp. cross-linkage 8% moisture 54-60% application(s) LPLC: suitable matrix styrene-divinylbenzene (gel) matrix active group trimethylammonium particle size 580-680 µm operating pH 0 - 14 capacity 1.1 meq/mL by wetted bed volume separation technique anion exchange
Safety Informationpictograms GHS07 signalword Warning hcodes H319 pcodes P305 + P351 + P338 Personal Protective Equipment Eyeshields, Gloves, type ABEK (EN14387) respirator filter RIDADR NONH for all modes of transport WGK Germany 3 Узнать цену -
AmberLite® MAC-3 H Cation Exchange Resin
CAS Number: 9052-45-3 MDL number: MFCD03098973 NACRES: SB.52
Кат. номер 546976-250G 546976-1FT3 546976-5KG 546976-1KG General descriptionDowex MAC-3 contains carboxylic acid as functional group and is selective for Cu and Fe. The resin has larger exchange capacity and large particle size.ApplicationDowex MAC-3 was used in the separation and pre-concentration of metal ions in alcohol. It was also used as packaging material in chromatographic columns for purification.
Weakly acidic cation exchanger for water treatment, dealkalization, purification of antibiotics, pharmaceuticals and amino acids, etc. The macroporous matrix gives the resin good resistance to osmotic shock, while maintaining a high regeneration efficiency.Packaging250 g in poly bottle
1 kg in poly bottleLegal InformationAmberlite is a registered trademark of The Dow Chemical Company or an affiliated company of DowПараметрыform beads parameter 120 °C max. temp. moisture 44-52% application(s) LPLC: suitable matrix acrylic polymer (macroporous) matrix active group carboxylic acid particle size 12-50 mesh, 300-1200 µm operating pH 4 - 14 capacity 3.8 meq/mL by wetted bed volume separation technique cation exchange InChI 1S/C10H10.C3H4O2/c1-3-9-7-5-6-8-10(9)4-2;1-2-3(4)5/h3-8H,1-2H2;2H,1H2,(H,4,5) InChI key TXDYWJDYXZCRAN-UHFFFAOYSA-N
Safety Informationpictograms GHS07 signalword Warning hcodes H319 pcodes P305 + P351 + P338 Personal Protective Equipment dust mask type N95 (US), Eyeshields, Gloves RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Amberlite® MB-20
MDL number: MFCD03791384 NACRES: SB.52
Кат. номер 74451-VAR-F 74451-250G-F 74451-1KG-F General descriptionAmberlite® MB-20 may be used for the removal of ions from aqueous solutions. Uses include primary water chemistry control in once-through systems, ultrapure water production, condensate polishing, in-process and column demineralization, and removal of ionic detergents (such as SDS) from protein samples.Packaging250 g in poly bottle
1 kg in poly bottleLegal InformationAmberlite is a registered trademark of The Dow Chemical Company or an affiliated company of DowПараметрыQuality Level 100 form beads quality mixed bed ion exchange resin, regenerated application(s) LPLC: suitable loss ~60% loss on drying, 110°C matrix PS-DVB matrix active group mixed mode particle size 20-50 mesh separation technique mixed mode
Safety Informationpictograms GHS05 signalword Danger hcodes H318 pcodes P280 - P305 + P351 + P338 + P310 Personal Protective Equipment Eyeshields, Gloves, type N95 (US) RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Amberlite® MB-9L
MDL number: MFCD03791385 NACRES: SB.52
Кат. номер 80310-VAR-F 80310-250G-F 80310-1KG-F Legal InformationAmberlite is a registered trademark of The Dow Chemical Company or an affiliated company of DowПараметрыQuality Level 100 form beads quality cannot be regenerated, mixed bed ion exchange resin (without indicator) application(s) LPLC: suitable loss ~60% loss on drying, 110°C matrix PS-DVB matrix active group mixed mode particle size 20-50 mesh separation technique mixed mode
Safety InformationPersonal Protective Equipment Eyeshields, Gloves, type N95 (US) RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
AmberLite® MB20 H/OH Mixed Bed Ion Exchange Resin hydrogen and hydroxide form 13687-U
MDL number: MFCD00166706 NACRES: SB.52 ApplicationDowex® Marathon™ MR-3 hydrogen and hydroxide form was used in assessing inorganic nitrogen in litter layer and soil using ion-exchange resin bags on Alpkem autoanalyzer and by ion chromatography.
Mixed bed ion exchange resin specially processed resin for condensate polishing; best for in-process and column demineralization.Other NotesThe Dowex® Marathon™ MR-3 is a superior resin to the Dowex MR-3. The Dowex Marathon series provides narrower particle Distribution, better efficiency, and improved kinetics when compared to the gaussian Dowex products.Legal InformationAmberlite is a registered trademark of The Dow Chemical Company or an affiliated company of Dow
DOWEX is a registered trademark of The Dow Chemical Company or an affiliated company of Dow
Marathon is a trademark of The Dow Chemical Company or an affiliated company of DowПараметрыQuality Level 100 description formerly Dowex® Marathon™ MR-3 H/OH form beads packaging bucket of 1000 g parameter 60 °C max. temp. moisture 46-51% (cation exchanger), 60-72% (anion exchanger) application(s) LPLC: suitable matrix styrene-divinylbenzene (gel) matrix active group mixed mode particle size 560-660 µm (anion form), 710-810 µm (cation form) operating pH 0 - 14 capacity 1.0 meq/mL by wetted bed volume(anion), 1.9 meq/mL by wetted bed volume separation technique mixed mode
Safety InformationPersonal Protective Equipment dust mask type N95 (US), Eyeshields, Gloves WGK Germany 3 Узнать цену -
AmberLite® MB20 H/OH Mixed Bed Ion Exchange Resin hydrogen and hydroxide form 13686-U
MDL number: MFCD00166706 NACRES: SB.52 ApplicationMixed bed ion exchange resin specially processed resin for condensate polishing; best for in-process and column demineralization.Other NotesThe Dowex® Marathon™ MR-3 is a superior resin to the Dowex MR-3. The Dowex Marathon series provides narrower particle Distribution, better efficiency, and improved kinetics when compared to the gaussian Dowex products.Legal InformationAmberlite is a registered trademark of The Dow Chemical Company or an affiliated company of Dow
DOWEX is a registered trademark of The Dow Chemical Company or an affiliated company of Dow
Marathon is a trademark of The Dow Chemical Company or an affiliated company of DowПараметрыQuality Level 100 description formerly Dowex® Marathon™ MR-3 H/OH form beads packaging bottle of 100 g parameter 60 °C max. temp. moisture 46-51% (cation exchanger), 60-72% (anion exchanger) application(s) LPLC: suitable matrix styrene-divinylbenzene (gel) matrix active group mixed mode particle size 560-660 µm (anion form), 710-810 µm (cation form) operating pH 0 - 14 capacity 1.0 meq/mL by wetted bed volume(anion), 1.9 meq/mL by wetted bed volume separation technique mixed mode
Safety InformationPersonal Protective Equipment dust mask type N95 (US), Eyeshields, Gloves WGK Germany 3 Узнать цену -
AmberLite® MB20 Mixed Ion Exchange Resin
MDL number: MFCD00166706 NACRES: SB.52
Кат. номер 428736-VAR 428736-500G 428736-1KG 428736-100G General descriptionDowex Marathon MR-3 is a premium, premixed, mixed bed product designed for polishing demineralized water to conductivities <0.1 μS/cm. Marathon MR-3 is a 1:1 equivalent mixture of Marathon C-10 (H) and Marathon A (OH)ApplicationDowex® Marathon™ MR-3 hydrogen and hydroxide form was used in assessing inorganic nitrogen in litter layer and soil using ion-exchange resin bags on Alpkem autoanalyzer and by ion chromatography.
Mixed bed ion exchange resin specially processed resin for condensate polishing; best for in-process and column demineralization.Packaging1 kg in poly bottle
100, 500 g in poly bottleFeatures and BenefitsUniform size beads offer higher surface area for increased capacity and faster kinetics. Nuclear grade, gel form, styrene-divinylbenzene copolymer matrixOther NotesThe Dowex® Marathon™ MR-3 is a superior resin to the Dowex MR-3. The Dowex Marathon series provides narrower particle Distribution, better efficiency, and improved kinetics when compared to the gaussian Dowex products.
This ion-exchange resin has not been specially processed nor cleaned. We suggest that it be treated to a suitable preliminary elution and wash.Legal InformationAmberlite is a registered trademark of The Dow Chemical Company or an affiliated company of Dow
DOWEX is a registered trademark of The Dow Chemical Company or an affiliated company of Dow
Marathon is a trademark of The Dow Chemical Company or an affiliated company of DowПараметрыQuality Level 100 description formerly Dowex® Marathon™ MR-3 H/OH form beads composition HCR-S[H+] and SBR[OH-]: in accordance parameter 60 °C max. temp. moisture 46-51% (cation exchanger), 60-72% (anion exchanger) application(s) LPLC: suitable matrix styrene-divinylbenzene (gel) matrix active group mixed mode particle size 20-50 mesh, 560-660 µm (anion form), 710-810 µm (cation form) operating pH 0 - 14 capacity 1.0 meq/mL by wetted bed volume(anion), 1.9 meq/mL by wetted bed volume separation technique mixed mode
Safety Informationpictograms GHS07 signalword Warning hcodes H315 - H319 - H335 pcodes P261 - P264 - P271 - P280 - P302 + P352 - P305 + P351 + P338 Target Organs Respiratory system Personal Protective Equipment dust mask type N95 (US), Eyeshields, Gloves RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Amberlite® XAD1180N
CAS Number: 97396-56-0 MDL number: MFCD00145830 NACRES: SB.52
Кат. номер 6474-1KG 6474-VAR 6474-250G General descriptionNonionic macroreticular resin that adsorbs and releases ionic species through hydrophobic and polar interactions; usually used under isocratic conditions.ApplicationPolymeric adsorbent for hydrophobic compounds: antibiotics, vitamins, amino acids, enzymes; for purification: gallium, myxovirescins, phosphoric acid, riboflavin salts.Legal InformationAmberlite is a registered trademark of The Dow Chemical Company or an affiliated company of DowПараметрыapplication(s) LPLC: suitable loss ~65% loss on drying, 110 °C matrix styrene/divinylbenzene matrix active group polymer particle size 20-60 mesh, 350-600 µm pore size 1.4 mL/g pore volume, 300-400 mean pore size surface area 450 m2/g separation technique reversed phase
Safety InformationPersonal Protective Equipment Eyeshields, Gloves, type N95 (US) RIDADR NONH for all modes of transport WGK Germany WGK 1 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Amberlite® XAD16N
CAS Number: 9003-69-4 MDL number: MFCD00145831 NACRES: SB.52
Кат. номер XAD16-1KG XAD16-500G XAD16-100G XAD16-25G General descriptionNonionic macroreticular resin that adsorbs and releases ionic species through hydrophobic and polar interactions; usually used under isocratic conditions.ApplicationHydrophobic compounds up to 40,000 MW; antibiotics; pharmaceutical manufacturing; surfactants; bitters; separation of large organic molecules (especially proteins). More efficient than XAD2.Packaging500 g in poly bottle
1 kg in poly bottleOther NotesHydrophobic polyaromatic resinLegal InformationAmberlite is a registered trademark of The Dow Chemical Company or an affiliated company of DowПараметрыform beads Quality Level 400 application(s) LPLC: suitable matrix styrene-divinylbenzene matrix active group polymer particle size 20-60 mesh, 560-710 µm pore size ~0.55 mL/g pore volume, 200 mean pore size surface area 800 m2/g separation technique reversed phase
Safety InformationPersonal Protective Equipment dust mask type N95 (US), Eyeshields, Gloves RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Amberlite® XAD4
CAS Number: 37380-42-0 MDL number: MFCD00132704 NACRES: SB.52
Кат. номер XAD4-1KG XAD4-500G XAD4-100G XAD4-25G General descriptionNonionic macroreticular resin that adsorbs and releases ionic species through hydrophobic and polar interactions; usually used under isocratic conditions.ApplicationPolyaromatic adsorbent for small hydrophobic compounds, surfactants, pharmaceutical manufacturing, phenols, chlorinated organics, pesticide removal and recovery, and organic removal from aqueous food streams.Packaging500 g in poly bottle
1 kg in poly bottleOther NotesHydrophobic polyaromatic resin
Two particle sizes are available:
Mesh 20-60 are Cat. Nos. 20276, 10358, XAD4
Mesh 20-50 is Cat. No. 06444Legal InformationAmberlite is a registered trademark of The Dow Chemical Company or an affiliated company of DowПараметрыQuality Level 100 form beads autoignition temp. 800 °F application(s) LPLC: suitable matrix styrene-divinylbenzene matrix active group polymer particle size 20-60 mesh pore size ~0.98 mL/g pore volume, 100 mean pore size surface area 750 m2/g density 1.02 g/mL (true wet)(lit.), 1.08 g/mL (skeletal)(lit.) separation technique reversed phase
Safety InformationPersonal Protective Equipment Eyeshields, Gloves, type N95 (US) RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Amberlite® XAD4 20276
CAS Number: 37380-42-0 MDL number: MFCD00132704 General descriptionAmberlite XAD4 is a nonpolar absorbent used for stripping and concentration of organic compounds. Bacillus subtilis immobilized on Amberlite XAD-4 has been investigated as new biosorbent in trace metal determination.
Nonionic macroreticular resin that adsorbs and releases ionic species through hydrophobic and polar interactions; usually used under isocratic conditions.ApplicationPolyaromatic adsorbent for small hydrophobic compounds, surfactants, pharmaceutical manufacturing, phenols, chlorinated organics, pesticide removal and recovery, and organic removal from aqueous food streams.- Amberlite® XAD4 was used in rapid fractionation technique.
- Amberlite XAD4 was used as sorbent for HPLC analysis.
Other NotesTwo particle sizes are available:
Mesh 20-60 are Cat. Nos. 20276, 10358, XAD4
Mesh 20-50 is Cat. No. 06444Legal InformationAmberlite is a registered trademark of The Dow Chemical Company or an affiliated company of DowПараметрыQuality Level 100 form solid autoignition temp. 800 °F packaging pkg of 100 g application(s) HPLC: suitable, LPLC: suitable matrix styrene-divinylbenzene matrix active group polymer particle size 20-60 mesh pore size ~0.98 mL/g pore volume, 100 mean pore size surface area 750 m2/g density 1.02 g/mL (true wet)(lit.), 1.08 g/mL (skeletal)(lit.) separation technique reversed phase
Safety InformationPersonal Protective Equipment Eyeshields, Gloves, type N95 (US) WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable 210,49 € / 19 783 ₽Получить предложение -
Amberlite® XAD4 10358
CAS Number: 37380-42-0 MDL number: MFCD00132704 General descriptionAmberlite XAD4, a nonpolar absorbent, used for stripping and concentration of organic compounds. It is also used in developing chelating ligands due to its properties like, porosity, high surface area, purity and durability.
Nonionic macroreticular resin that adsorbs and releases ionic species through hydrophobic and polar interactions; usually used under isocratic conditions.ApplicationAmberlite® XAD4 was used:- in rapid fractionation technique
- as sorbent for HPLC analysis
Polyaromatic adsorbent for small hydrophobic compounds, surfactants, pharmaceutical manufacturing, phenols, chlorinated organics, pesticide removal and recovery, and organic removal from aqueous food streams.Other NotesTwo particle sizes are available:
Mesh 20-60 are Cat. Nos. 20276, 10358, XAD4
Mesh 20-50 is Cat. No. 06444Legal InformationAmberlite is a registered trademark of The Dow Chemical Company or an affiliated company of DowПараметрыQuality Level 100 form solid autoignition temp. 800 °F packaging pkg of 500 g application(s) HPLC: suitable, LPLC: suitable matrix styrene-divinylbenzene matrix active group polymer particle size 20-60 mesh pore size ~0.98 mL/g pore volume, 100 mean pore size surface area 750 m2/g density 1.02 g/mL (true wet)(lit.), 1.08 g/mL (skeletal)(lit.) separation technique reversed phase
Safety InformationPersonal Protective Equipment Eyeshields, Gloves, type N95 (US) WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable 4 833,21 € / 454 258 ₽Получить предложение -
Amberlite® XAD7HP
MDL number: MFCD00132705 NACRES: SB.52
Кат. номер XAD7-100G XAD7-500G XAD7-1KG XAD7-25G General descriptionNonionic macroreticular resin that adsorbs and releases ionic species through hydrophobic and polar interactions; usually used under isocratic conditions.ApplicationWeakly polar adsorbent resin for compounds up to 60,000 MW: insulin, fulvic and humic compounds, dry waste, organic removal and recovery, and antibiotic recovery.Packaging1 kg in poly bottle
100, 500 g in poly bottleOther NotesModerately polar acrylic resin
Two particle sizes are available:
Mesh 20-60 is Cat. No. XAD7
Mesh 20-50 is Cat. No. 06445Legal InformationAmberlite is a registered trademark of The Dow Chemical Company or an affiliated company of DowПараметрыQuality Level 100 vapor density <1 (vs air) vapor pressure 17 mmHg ( 20 °C) form beads autoignition temp. 800 °F application(s) LPLC: suitable matrix acrylic matrix active group polymer particle size 20-60 mesh, 560-710 µm pore size 0.5 mL/g pore volume, 300-400 mean pore size surface area 380 m2/g separation technique reversed phase
Safety InformationPersonal Protective Equipment Eyeshields, Gloves, type N95 (US) RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Amberlite® XAD®-2 10357
CAS Number: 9003-70-7 General descriptionAmberlite XAD-2, a hydrophobic copolymer of styrene-divinylbenzene resin, requires longer purification process and is used as a sorbent. Amberlite XAD-2 resin depending upon the aromaticity and size of the hydrophobic groups sorbs organic compounds through low-energy physical interactions.
Nonionic macroreticular resin that adsorbs and releases ionic species through hydrophobic and polar interactions; usually used under isocratic conditions.
Specifications:ApplicationAmberlite® XAD®-2 was used:- as adsorbent in the extraction of organochlorine compounds using Soxhlat extraction technique
- as adsorbent in the extraction of honey samples using column chromatography for HPLC analysis
- in adsorption chromatography
Polyaromatic adsorbent resin for hydrophobic compounds up to MW 20,000: phenols, organic removal, surfactants, aroma compounds, antibiotic recovery. May be used as support for catalyst or metals removal. For cleaned US EPA versions, see Supelpak-2 and Supelpak-2B.
Legal InformationAmberlite is a registered trademark of The Dow Chemical Company or an affiliated company of Dow
XAD is a registered trademark of The Dow Chemical Company or an affiliated company of DowПараметрыQuality Level 100 form beads (small) packaging pkg of 500 g application(s) HPLC: suitable, LPLC: suitable matrix styrene-divinylbenzene (macroreticular) matrix active group polymer particle size 20-60 mesh pore size ~0.65 mL/g pore volume, 90 mean pore size surface area ~300 m2/g density 1.02 g/mL at 25 °C (true wet)(lit.), 1.08 g/mL at 25 °C (skeletal)(lit.) separation technique reversed phase storage temp. 2-8°C
Safety InformationPersonal Protective Equipment Eyeshields, Gloves, type N95 (US) WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable 8 059,92 € / 757 526 ₽Получить предложение -
Amberlite® XAD®-2 3025-U
CAS Number: 9003-70-7 NACRES: SB.52 General descriptionAmberlite XAD-2, a hydrophobic copolymer of styrene-divinylbenzene resin which requires longer purification process and is used as a sorbent. Amberlite XAD-2 resin depending upon the aromaticity and size of the hydrophobic groups sorbs organic compounds through low-energy physical interactions.
Nonionic macroreticular resin that adsorbs and releases ionic species through hydrophobic and polar interactions; usually used under isocratic conditions.
Specifications:ApplicationAmberlite® XAD®-2 was used:- as adsorbent in the extraction of organochlorine compounds using Soxhlat extraction technique
- as adsorbent in the extraction of honey samples using column chromatography for HPLC analysis
- in adsorption chromatography
Polyaromatic adsorbent resin for hydrophobic compounds up to MW 20,000: phenols, organic removal, surfactants, aroma compounds, antibiotic recovery. May be used as support for catalyst or metals removal. For cleaned US EPA versions, see Supelpak-2 and Supelpak-2B.
Legal InformationAmberlite is a registered trademark of The Dow Chemical Company or an affiliated company of Dow
XAD is a registered trademark of The Dow Chemical Company or an affiliated company of DowПараметрыQuality Level 100 form solid packaging pkg of 25 kg application(s) HPLC: suitable, LPLC: suitable, ion chromatography: suitable matrix styrene-divinylbenzene (macroreticular) matrix active group polymer particle size 20-60 mesh pore size ~0.65 mL/g pore volume, 90 mean pore size surface area ~300 m2/g density 1.02 g/mL at 25 °C (true wet)(lit.), 1.08 g/mL at 25 °C (skeletal)(lit.) separation technique reversed phase
Safety InformationPersonal Protective Equipment Eyeshields, Gloves, type N95 (US) RIDADR NONH for all modes of transport WGK Germany 3 Узнать цену -
Amberlite® XAD®-2 20275
CAS Number: 9003-70-7 General descriptionAmberlite XAD-2, a hydrophobic copolymer of styrene-divinylbenzene resin, requires longer purification process and is commonly used as a sorbent. Amberlite XAD-2 resin sorbs organic compounds depending upon the aromaticity and size of the hydrophobic groups through low-energy physical interactions.
Nonionic macroreticular resin that adsorbs and releases ionic species through hydrophobic and polar interactions; usually used under isocratic conditions.
Specifications:Application- Amberlite® XAD®-2 was used as adsorbent in the extraction of organochlorine compounds using Soxhlat extraction technique.
- Amberlite® XAD®-2 was used as adsorbent in the extraction of honey samples using column chromatography for HPLC analysis.
- Amberlite® XAD®-2 was used in adsorption chromatography.
Polyaromatic adsorbent resin for hydrophobic compounds up to MW 20,000: phenols, organic removal, surfactants, aroma compounds, antibiotic recovery. May be used as support for catalyst or metals removal. For cleaned US EPA versions, see Supelpak-2 and Supelpak-2B.
Legal InformationAmberlite is a registered trademark of The Dow Chemical Company or an affiliated company of Dow
XAD is a registered trademark of The Dow Chemical Company or an affiliated company of DowПараметрыQuality Level 100 form solid packaging pkg of 100 g application(s) HPLC: suitable, LPLC: suitable matrix styrene-divinylbenzene (macroreticular) matrix active group polymer particle size 20-60 mesh pore size ~0.65 mL/g pore volume, 90 mean pore size surface area ~300 m2/g density 1.02 g/mL at 25 °C (true wet)(lit.), 1.08 g/mL at 25 °C (skeletal)(lit.) separation technique reversed phase storage temp. 2-8°C
Safety InformationPersonal Protective Equipment Eyeshields, Gloves, type N95 (US) WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Amberlite® XAD®-2 52672-U
CAS Number: 9003-70-7 NACRES: SB.52 General descriptionAmberlite XAD-2, a hydrophobic copolymer of styrene-divinylbenzene resin which requires longer purification process and is used as a sorbent. Amberlite XAD-2 resin depending upon the aromaticity and size of the hydrophobic groups sorbs organic compounds through low-energy physical interactions.
Nonionic macroreticular resin that adsorbs and releases ionic species through hydrophobic and polar interactions; usually used under isocratic conditions.
Specifications:ApplicationAmberlite® XAD®-2 was used:- as adsorbent in the extraction of organochlorine compounds using Soxhlat extraction technique
- as adsorbent in the extraction of honey samples using column chromatography for HPLC analysis
- in adsorption chromatography
Polyaromatic adsorbent resin for hydrophobic compounds up to MW 20,000: phenols, organic removal, surfactants, aroma compounds, antibiotic recovery. May be used as support for catalyst or metals removal. For cleaned US EPA versions, see Supelpak-2 and Supelpak-2B.
Legal InformationAmberlite is a registered trademark of The Dow Chemical Company or an affiliated company of Dow
XAD is a registered trademark of The Dow Chemical Company or an affiliated company of DowПараметрыform solid packaging pkg of 10 kg application(s) HPLC: suitable, LPLC: suitable matrix styrene-divinylbenzene (macroreticular) matrix active group polymer particle size 20-60 mesh pore size ~0.65 mL/g pore volume, 90 mean pore size surface area ~300 m2/g density 1.02 g/mL at 25 °C (true wet)(lit.), 1.08 g/mL at 25 °C (skeletal)(lit.) separation technique reversed phase
Safety InformationPersonal Protective Equipment Eyeshields, Gloves, type N95 (US) RIDADR NONH for all modes of transport WGK Germany 3 Узнать цену -
Amberlite® XAD®-2 SU853005
CAS Number: 9003-70-7 NACRES: SB.52 General descriptionAmberlite® XAD®-2 is a strongly acidic ion-exchange resin.
Nonionic macroreticular resin that adsorbs and releases ionic species through hydrophobic and polar interactions; usually used under isocratic conditions.
Specifications:ApplicationAmberlite® XAD®-2 may be used as a stationary phase material for the solid phase extraction (SPE) of phenolic acids and flavonols from honey samples prior to their identification by high performance liquid chromatography-diode array detection (HPLC-DAD), phthalate esters (PAEs) from hydroalcoholic food beverages prior to their determination by gas chromatography (GC) equipped with flame ionization detector (FID) as well as ion-trap mass spectrometry detector (IT/MS), benzoic and sorbic acids in quince jam prior to their analysis by isocratic HPLC combined with photodiode array (PDA) detector and organophosphorus pesticides in natural and drinking waters prior to their determination by GC-FID or GC coupled to nitrogen-phosphorus detector (NPD).
Polyaromatic adsorbent resin for hydrophobic compounds up to MW 20,000: phenols, organic removal, surfactants, aroma compounds, antibiotic recovery. May be used as support for catalyst or metals removal. For cleaned US EPA versions, see Supelpak-2 and Supelpak-2B.
Legal InformationAmberlite is a registered trademark of The Dow Chemical Company or an affiliated company of Dow
XAD is a registered trademark of The Dow Chemical Company or an affiliated company of DowПараметрыQuality Level 100 form solid packaging pkg of 5 kg application(s) LPLC: suitable, solid phase extraction (SPE): suitable matrix styrene-divinylbenzene (macroreticular) matrix active group polymer particle size 20-60 mesh pore size ~0.65 mL/g pore volume, 90 mean pore size surface area ~300 m2/g density 1.02 g/mL at 25 °C (true wet)(lit.), 1.08 g/mL at 25 °C (skeletal)(lit.) separation technique reversed phase
Safety InformationPersonal Protective Equipment Eyeshields, Gloves, type N95 (US) RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Amberlyst® 15 hydrogen form
CAS Number: 39389-20-3 MDL number: MFCD00145841 NACRES: SB.52
Кат. номер 216399-2.5KG 216399-500G 216399-25G General descriptionIt is a macro reticular polystyrene based ion exchange resin with strongly acidic sulfonic group. It serves as an excellent source of strong acid. It can also be used several times. Amberlyst 15 is a heat sensitive macro-porous sulfonic ion exchange acid resin which could be used as a catalyst.ApplicationStrongly acidic cation exchange resin used as a heterogeneous acid catalysis; suitable for non-aqueous catalysis.
Amberlite® 15 may be used as column packing material for HPLC analysis. Amberlite® 15 hydrogen form may be used in separation media for TLC, paper and LPL chromatography.Packaging25, 500 g in poly bottle
2.5 kg in poly bottleChem/Phys ResistanceSwelling (dry to solvent saturated, %):
hexane 10-15; toluene 10-15; ethylene dichloride 15-20; ethylene acetate 30-40; 95% ethylene alcohol 60-70; water 60-70.Legal InformationAmberlite is a registered trademark of The Dow Chemical Company or an affiliated company of Dow
Amberlyst is a registered trademark of The Dow Chemical Company or an affiliated company of DowПараметрыQuality Level 100 form beads quality wet parameter 120 °C max. temp. moisture 1.6% application(s) LPLC: suitable matrix styrene-divinylbenzene (macroreticular) matrix active group sulfonic acid functional group particle size <300 µm operating pH 0 - 14 capacity 1.7 meq/mL by wetted bed volume, 4.7 meq/g by dry weight separation technique cation exchange InChI 1S/C10H10.C8H8O3S/c1-3-9-7-5-6-8-10(9)4-2;1-2-7-5-3-4-6-8(7)12(9,10)11/h3-8H,1-2H2;2-6H,1H2,(H,9,10,11) InChI key SIWVGXQOXWGJCI-UHFFFAOYSA-N
Safety InformationPersonal Protective Equipment dust mask type N95 (US), Eyeshields, Gloves RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Amberlyst® 16 wet
CAS Number: 125004-35-5 MDL number: MFCD03791386 NACRES: SB.52
Кат. номер 86317-250G-F 86317-VAR-F 86317-1KG-F Packaging250 g in poly bottleApplicationespecially for heterogeneous catalysis, with more resistance to thermal degradationLegal InformationAmberlyst is a registered trademark of The Dow Chemical Company or an affiliated company of DowПараметрыQuality Level 100 form beads crosslinking 12 % cross-linked application(s) LPLC: suitable loss ~50% loss on drying, 110°C matrix styrene divinylbenzene (macroporous) matrix active group sulfonic acid functional group particle size ~700 µm capacity 4.8 meq/g separation technique cation exchange
Safety InformationPersonal Protective Equipment Eyeshields, Gloves, type N95 (US) RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Amberlyst® 36
CAS Number: 39389-20-3 MDL number: MFCD00145841 NACRES: SB.52
Кат. номер 436712-250G 436712-1KG General descriptionShrinkage:
Water to phenol: 45%
Water to dry: 54%Packaging250 g in poly bottle
1 kg in poly bottleLegal InformationAmberlyst is a registered trademark of The Dow Chemical Company or an affiliated company of DowПараметрыQuality Level 100 form beads crosslinking 12 % cross-linked contains 51-57% Moisture content (H+ form) composition water, 55% application(s) LPLC: suitable surface area 33 m2/g matrix styrene divinylbenzene (macroporous) matrix active group sulfonic acid functional group particle size <0.425 mm (0.5% max), 0.600-0.850 mm (uniformity coefficient: <1.6), >1.180 mm (4.0% max) pore size 0.20 mL/g total pore volume, 240 average pore diameter capacity >1.95 eq/L exchange capacity, >5.40 meq/g exchange capacity density 1.2 g/mL at 25 °C (lit.) separation technique cation exchange InChI 1S/C10H10.C8H8O3S/c1-3-9-7-5-6-8-10(9)4-2;1-2-7-5-3-4-6-8(7)12(9,10)11/h3-8H,1-2H2;2-6H,1H2,(H,9,10,11) InChI key SIWVGXQOXWGJCI-UHFFFAOYSA-N
Safety InformationPersonal Protective Equipment dust mask type N95 (US), Eyeshields, Gloves RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Amberlyst® A21 free base
MDL number: MFCD00145842 NACRES: SB.52
Кат. номер 216410-1KG 216410-250G 216410-5G 216410-4X1KG General descriptionAmberlyst A21 is a neutral ion-exchange resin and a solid base which catalyses three-component reaction of aldehyde and malononitrile with various active methylene compounds to synthesize a range of pyran annulated heterocycles. Use of the solid base is to generate a highly green protocol by eliminating chromatographic purification involving hazardous organic solvents, and for easy recovery and reusability of the catalyst. Amberlyst A21 is used as a fluid bed resin. Fluid bed reactor allows gel-type beads, of polymer-supported (PS) organic reactions, to be used in a flow system. The Michael reaction between methyl 1-oxoindan-2-carboxylate and methyl vinyl ketone in toluene can be attained through a fluid bed of Amberlyst A21 at 50°C.ApplicationAmberlyst® A21 free base was used in catalyst preparation.Packaging5, 250 g in poly bottle
1 kg in poly bottleFeatures and BenefitsWeakly basic, macroreticular resin with alkyl amine functionality.Legal InformationAmberlyst is a registered trademark of The Dow Chemical Company or an affiliated company of DowПараметрыQuality Level 100 vapor density <1 (vs air) vapor pressure 17 mmHg ( 20 °C) form beads autoignition temp. 800 °F moisture 56-62% application(s) LPLC: suitable matrix styrene divinylbenzene (macroporous) matrix active group dimethylamino particle size 22-30 mesh, 490-690 µm capacity 1.3 meq/mL by wetted bed volume separation technique anion exchange
Safety InformationPersonal Protective Equipment Eyeshields, Gloves, type N95 (US) RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Amberlyst® A26 hydroxide form
CAS Number: 39339-85-0 MDL number: MFCD03096474 NACRES: SB.52
Кат. номер 542571-1KG 542571-100G ApplicationStrongly basic (type I) anion exchange resin used to remove transition metal complexes and mercaptans from hydrocarbons, remove acids from non-polar solvents, and deacidifying phenol-acetone solutions. Its porous structure makes it a good polymeric catalyst in non-aqueous and aqueous media; it has no pH limitations.
Amberlyst® A26 hydroxide form is a strongly basic, macroreticular resin with quaternary ammonium functionality used to catalyze aldol condensation, also useful in aqueous and nonaqueous media to remove anionic transition metal complexes, mercaptans and acids from hydrocarbons and other nonpolar solvents. It was used to determine cadmium using flow injection atomic absorption spectrometry. It was also used as packaging material for column chromatography assay.Packaging100 g in poly bottle
1 kg in poly bottleFeatures and BenefitsInert in strong acids, concentrated aldalies, aliphatic and aromatic hydrocarbons, alcohols, ethers, and other common solvents.
Maximum operating temperature 60C.Legal InformationAmberlyst is a registered trademark of The Dow Chemical Company or an affiliated company of DowПараметрыQuality Level 100 form beads concentration 1 N in NaOH (Regenerant concentration) parameter 60 °C OH- form max. temp. moisture 66-75% application(s) LPLC: suitable bed D 24 in. impurities 45-65% (moisture) matrix styrene-divinylbenzene (macroreticular) matrix active group quaternary ammonium functional group particle size 16-45 mesh, 560-700 µm pore size 0.30 mL/g pore volume, 400 mean pore size surface area ~30 m2/g capacity 0.8 meq/mL by wetted bed volume bulk density 41 lb/cu.ft separation technique anion exchange
Safety InformationPersonal Protective Equipment Eyeshields, Gloves, multi-purpose combination respirator cartridge (US) RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
AmberSep® (formerly Dowex®) Retardion 11A8
CAS Number: 68955-09-9 MDL number: MFCD00163521 NACRES: SB.52
Кат. номер 428698-500G 428698-100G 428698-VAR 428698-50G 428698-5KG 428698-1FT3 General descriptionAmphoteric properties of Dowex Retardion 11A8 allows specific isolation of elements from complex mixtures which generally is possible with use of monofunctional ion exchangers. Determination of trace amounts of Zinc and Cadmium by radiochemical NAA was performed using Retardion 11A8.
The Retardion 11A8 is not a true mixed bed resin, but a resin with mixed functionality. It contains paired anion and cation exchange sites (each exists as the other′s counter-ion) that adsorb mobile ions from a bulk stream.ApplicationDowex Retardion 11A8 was used in solid phase extraction for determination of total concentrations by flame atomic absorption spectrometry.
Chromatographic resin for ion separation. Useful for removal of ionic detergents (e.g., SDS) from protein samples. It is used for the removal of electrolytes from water solutions, and separation of cations from anions. Desalting occurs by SEC-type mechanism, so column use is recommended for best success.
Packaging100, 500 g in poly bottlePhysical formMixed bedOther NotesThis ion-exchange resin has not been specially processed nor cleaned. We suggest that it be treated to a suitable preliminary elution and wash.Legal InformationAmbersep is a registered trademark of The Dow Chemical Company or an affiliated company of Dow
DOWEX is a registered trademark of The Dow Chemical Company or an affiliated company of DowПараметрыQuality Level 100 description amphoteric form form beads parameter 70 °C max. temp. moisture 43-48% application(s) LPLC: suitable color deep yellow, tan matrix amphoteric styrene-divinylbenzene (gel) matrix active group mixed mode particle size 50-100 mesh operating pH 0 - 14 capacity 0.7 meq/mL by wetted bed volume separation technique mixed mode
Safety Informationpictograms GHS07 signalword Warning hcodes H315 - H319 - H335 pcodes P302 + P352 - P305 + P351 + P338 Target Organs Respiratory system RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
AMBERSEP® 21K XLT Mesh Anion Exchange Resin (Cl-)
CAS Number: 60177-39-1 MDL number: MFCD00145586 PubChem Substance ID: 24866990 NACRES: SB.52
Кат. номер 436658-1KG 436658-VAR 436658-250G 436658-1FT3 General descriptionThis is mining grade material, and does NOT meet FDA 21 CFR 173.25. For information on the Dowex 21K XLT resin, contact techservice@sial.com.Packaging250 g in poly bottle
1 kg in poly bottleOther NotesThis ion-exchange resin has not been specially processed nor cleaned. We suggest that it be treated with a suitable preliminary elution and wash.Legal InformationAmbersep is a registered trademark of The Dow Chemical Company or an affiliated company of DowПараметрыQuality Level 100 form beads crosslinking <10 % cross-linked moisture 50-58% application(s) LPLC: suitable matrix styrene-divinylbenzene (gel) matrix active group trimethylamine particle size 525-625 µm capacity 1.2 meq/mL by wetted bed volume separation technique anion exchange
Safety InformationRIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Ambersep® 900 hydroxide form
CAS Number: 9017-79-2 MDL number: MFCD00802695 NACRES: SB.52
Кат. номер 6476-1KG 6476-VAR 6476-250G General descriptionStongly basic (type I) anion exchange resin.ApplicationAmbersep 900 hydroxide resin has been used for the selective removal of chlorophyll from natural extracts with a high phytochemical content. It may be used as a catalyst for the synthesis of glycerol carbonate by using glycerol and dimethyl carbonate reactants.Legal InformationAmbersep is a registered trademark of The Dow Chemical Company or an affiliated company of DowПараметрыform beads moisture 64% application(s) LPLC: suitable loss ~75% loss on drying, 110 °C matrix styrene/divinylbenzene matrix active group quaternary ammonium particle size 20-50 mesh capacity 0.8 meq/mL by wetted bed volume separation technique anion exchange
Safety InformationPersonal Protective Equipment Eyeshields, Gloves RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Ambersep® M4195 Chelating Anion Exchange Resin sulfate 13727-U
NACRES: SB.52 General descriptionDowex® M4195, a weakly basic solid supported polyamine chelating anion exchange resin, acts as an effective adsorbent for nickel and cobalt even in low pH.Application- Dowex® M4195 was used in removal of heavy metals from water using UV-VIS spectrophotometery.
- Dowex M4195 was used to purify the Cu2+ from oligosaccharide and was checked by coulometry.
- Dowex M4195 was used in the preparation of Cu-supported calatyst Dw-BPMA-Cu+.
Chelating resin for the removal of cobalt, copper, nickel; metal recovery; mining; general hydrometallurgy.Legal InformationAmbersep is a registered trademark of The Dow Chemical Company or an affiliated company of Dow
DOWEX is a registered trademark of The Dow Chemical Company or an affiliated company of DowПараметрыQuality Level 100 description replaces Dowex® M4195 form beads packaging jar of 100 g parameter 60 °C max. temp. moisture 40-60% application(s) LPLC: suitable matrix styrene-divinylbenzene (macroporous) matrix active group bis-picolylamine functional group particle size 20-50 mesh operating pH 0 - 7 capacity 33 g/L(copper) compatibility mode of use chelating resin separation technique affinity
Safety InformationPersonal Protective Equipment Eyeshields, Gloves, type N95 (US) WGK Germany 3 Узнать цену -
Ambersep® M4195 Chelating Anion Exchange Resin sulfate 13728-U
NACRES: SB.52 General descriptionDowex® M4195, a weakly basic solid supported polyamine chelating anion exchange resin, acts as an effective adsorbent for nickel and cobalt even in low pH.Application- Dowex® M4195 was used in removal of heavy metals from water using UV-VIS spectro photometer.
- Dowex M4195 was used to purify the Cu2+ from oligosaccharide and was checked by coulometry.
- Dowex M4195 was used in the preparation of Cu-supported calatyst Dw-BPMA-Cu+.
Chelating resin for the removal of cobalt, copper, nickel; metal recovery; mining; general hydrometallurgy.Legal InformationAmbersep is a registered trademark of The Dow Chemical Company or an affiliated company of Dow
DOWEX is a registered trademark of The Dow Chemical Company or an affiliated company of DowПараметрыQuality Level 100 description replaces Dowex® M4195 form beads packaging pkg of 500 g parameter 60 °C max. temp. moisture 40-60% application(s) LPLC: suitable matrix styrene-divinylbenzene (macroporous) matrix active group bis-picolylamine functional group particle size 20-50 mesh operating pH 0 - 7 capacity 33 g/L(copper) compatibility mode of use chelating resin separation technique affinity
Safety InformationPersonal Protective Equipment Eyeshields, Gloves, type N95 (US) WGK Germany 3 Узнать цену -
Ambersep® M4195 Chelating Anion Exchange Resin sulfate 13729-U
NACRES: SB.52 General descriptionDowex® M4195, a weakly basic solid supported polyamine chelating anion exchange resin, acts as an effective adsorbent for nickel and cobalt even in low pH.Application- Dowex® M4195 was used in removal of heavy metals from water using UV-VIS spectro photometer.
- Dowex M4195 was used to purify the Cu2+ from oligosaccharide and was checked by coulometry.
- Dowex M4195 was used in the preparation of Cu-supported calatyst Dw-BPMA-Cu+.
Chelating resin for the removal of cobalt, copper, nickel; metal recovery; mining; general hydrometallurgy.Legal InformationAmbersep is a registered trademark of The Dow Chemical Company or an affiliated company of Dow
DOWEX is a registered trademark of The Dow Chemical Company or an affiliated company of DowПараметрыQuality Level 100 description replaces Dowex® M4195 form beads packaging pkg of 1000 g parameter 60 °C max. temp. moisture 40-60% application(s) LPLC: suitable matrix styrene-divinylbenzene (macroporous) matrix active group bis-picolylamine functional group particle size 20-50 mesh operating pH 0 - 7 capacity 33 g/L(copper) compatibility mode of use chelating resin separation technique anion exchange
Safety InformationPersonal Protective Equipment Eyeshields, Gloves, type N95 (US) WGK Germany 3 Узнать цену -
AmberSep® OPTIPORE L-493 Polymeric Adsorbent
CAS Number: 69011-14-9 NACRES: SB.52
Кат. номер 573698-100G 573698-500G 573698-VAR 573698-1FT3 573698-5KG Packaging100, 500 g in poly bottleApplicationPolyaromatic adsorbent for the concentration of organics from water; considered a better option than carbon.- Hydrophobic adsorbent with non-catalytic activity
- High capacity for organic compounds
- Macroporous beads with good mechanical strength
Legal InformationAmbersep is a registered trademark of The Dow Chemical Company or an affiliated company of DowПараметрыQuality Level 100 form beads application(s) LPLC: suitable matrix styrene-divinylbenzene (macroporous) matrix active group polymer particle size 20-50 mesh pore size 1.16 mL/g pore volume, 46 mean pore size surface area 1100 m2/g bulk density 680 g/L (19.0 kg/cuft) separation technique mixed mode
Safety InformationPersonal Protective Equipment Eyeshields, Gloves, type N95 (US) RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
AmberTec™ UP550 OH Anion Exchange Resin
Кат. номер 14016-U 14018-U 14019-U 14015-U ApplicationDOWEX MONOSPHERE 550A UPW (OH) type 1 strong base anion exchange resin is recommended for the roughing, intermediate and polishing ion exchange applications. Low TOC levels in the UPW grade are achieved by deliberate functionalization and rinsing. UPW grade is characterized by its light color, superior crush strength, and high (greater than 95%) conversion of exchange sites to the hydroxide (OH) form.FootnoteNote - Dowex Monosphere 550A UPW OH is now AmberTec UP550 OH, a brand of DupontLegal InformationAmberTec is a trademark of E. I. du Pont de Nemours and Company
DOWEX is a registered trademark of The Dow Chemical Company or an affiliated company of Dow
Monosphere is a registered trademark of The Dow Chemical Company or an affiliated company of DowПараметрыdescription Trimethylamine functionalised copolymer of styrene and divinylbenzene in the hydroxide form (CAS No. 69011-18-3; Water (CAS No. 7732-18-5), formerly Dowex® Monosphere® 550A UPW OH form beads packaging pkg of 1 kg (14016-U), pkg of 100 g (14015-U), pkg of 20 kg (14019-U), pkg of 5 kg (14018-U) Торговая марка Du Pont AmberTec™ parameter 60 °C max. temp. application(s) LPLC: suitable matrix styrene-divinylbenzene matrix active group quaternary amine functional group particle size 590 µm std dev ±50 operating pH 0 - 14 capacity 1.0 eq/L by wetted bed volume, 55-65 % water retention capacity ((OH)) separation technique anion exchange
Safety Informationpictograms GHS07 signalword Warning hcodes H319 pcodes P305 + P351 + P338 Personal Protective Equipment dust mask type N95 (US), Eyeshields, Gloves RIDADR NONH for all modes of transport WGK Germany 3 Узнать цену -
Amino-functionalized silica gel spherical
CAS Number: 126850-14-4 NACRES: SB.52
Кат. номер 79297-1KG 79297-100G General descriptionAmino-functionalized silica gel spherical is monodisperse in size and shape. It is prepared and characterized by thermogravimetery, X-ray diffraction, FT-IR, scanning electron microscopy (SEM) and N2 adsorption-desorption techniques.ПараметрыQuality Level 100 grade high-purity grade form powder composition carbon content, 3.0% , nitrogen content, 1.0% application(s) LPLC: suitable loss ~5% loss on drying matrix Silica matrix active group amino-functionalized silica particle size 40-75 µm pore size 110 A pore size surface area 500 m2/g (approx.) separation technique hydrophilic interaction (HILIC)
Safety Informationpictograms GHS08 signalword Warning hcodes H371 pcodes P260 RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F 464.0 °F Flash Point C > 240 °C Узнать цену -
Avicel® PH-101
CAS Number: 9004-34-6 EC Number: 232-674-9 MDL number: MFCD00081512 NACRES: SB.52
Кат. номер 11365-1KG 11365-VAR Application- Avicel® PH-101 was used as reference material in characterisation of microcrystalline cellulose (MCC) using Powder X-ray diffraction and Fourier transform infrared spectroscopy.
- Avicel® PH-101 was used to evaluate crystallinity index and spectral analysis of cellulose using XRD and solid-state 13C NMR.
- Avicel® PH-101 was used in preparation of phosphoric acid-swollen cellulose for enzyme assay using HPLC.
High purity cellulose powders for partition chromatography.Legal InformationAvicel is a registered trademark of FMC Corp.Параметрыform powder Quality Level 100 application(s) LPLC: suitable matrix Cellulose matrix active group polymer particle size ~50 µm separation technique size exclusion (SEC)
Safety InformationPersonal Protective Equipment Eyeshields, Gloves, type N95 (US) RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Bottom-drip adapter for large columns Z181692-1EA
NACRES: SB.52 General descriptionShallow taper of upper end minimizes mixing below the PE packing support disc (included). All adapters have an Ace Thred #50 and include one FETFE® O-ring.Legal InformationFETFE is a registered trademark of Ace Glass, Inc.Параметрыmaterial Nylon Торговая марка Ace Glass application(s) LPLC: suitable Узнать цену -
Bottom-drip adapter for large columns Z180173-1EA
General descriptionShallow taper of upper end minimizes mixing below the PE packing support disc (included). All adapters have an Ace Thred #50 and include one FETFE® O-ring.Legal InformationFETFE is a registered trademark of Ace Glass, Inc.Параметрыmaterial PTFE Торговая марка Ace Glass application(s) LPLC: suitable Узнать цену -
Bottom-drip adapter for large columns Z180181-1EA
NACRES: SB.52 General descriptionShallow taper of upper end minimizes mixing below the PE packing support disc (included). All adapters have an Ace Thred #50 and include one FETFE® O-ring.Legal InformationFETFE is a registered trademark of Ace Glass, Inc.Параметрыmaterial PTFE Торговая марка Ace Glass application(s) LPLC: suitable Узнать цену -
Bottom-drip adapter for large columns Z180203-1EA
General descriptionShallow taper of upper end minimizes mixing below the PE packing support disc (included). All adapters have an Ace Thred #50 and include one FETFE® O-ring.Legal InformationFETFE is a registered trademark of Ace Glass, Inc.Параметрыmaterial PTFE Торговая марка Ace Glass application(s) LPLC: suitable Узнать цену
Получите коммерческое предложение в течение 1 часа
Менеджер подготовит коммерческое предложение и позвонит, если понадобится уточнить детали вашего заказа
Анна Гловацкая
Менеджер по работе с клиентами
С 2010 года мы поставляем оборудование с заводов Европы. Берем на себя все — от подбора оборудования до внедрения на предприятии
Все сотрудники имеют высшее образование, закончили ведущие химические вузы страны, такие как РХТУ им Менделеева.
У большинства компаний срок ожидания составляет 10-12 недель.
Оборудование хранится на сухом отапливаемом складе, где поддерживается ровная температура.
Работаем с PonyExpress и Деловыми линиями. Вы также можете выбрать свою транспортную компанию или забрать товар со склада в Москве.
В случае любых неполадок за свой счет выполним ремонт в сервисном центре или на заводе-изготовителе. Или бесплатно заменим прибор на новый.
Производим пуско-наладку оборудования, валидацию, обучение сотрудников. Если нужно, привлекаем инженеров с заводов- изготовителей.
