HPLC Columns
- Сортировать:
- Вид таблицей
-
BIOshell™ A160 Peptide C18, 2.7 m HPLC Column 66905-U
NACRES: SB.52 General descriptionBIOshell™ 160 Peptide C18 columns are specifically engineered to provide efficient separation of peptides as well as small proteins. These columns contain advanced Fused-Core particles with pores strategically sized to 160 to enable optimized peptide diffusion. This attribute makes these columns an excellent choice for peptide mapping. Additionally, the sterically-protected C18 ligands provide extra stability allowing the columns to be used at an extended pH range (2-9) and high temperatures (up to 90 °C). This greatly expands the application range for the separation of biomolecules.ApplicationUHPLC Analysis of Peptides on BIOshell™ A160 Peptide C18, CN, and Phenyl-Hexyl, 2.7 µm
BIOshell™ A160 Peptide C18, 2.7 µm HPLC Column, a non-end capped column that has superficially porous particle with C18 alkyl ligand as the stationary phase, is used mainly in the separation of peptides at a good flow rate.Features and BenefitsBIOshell™ A160 Peptide C18, 2.7 µm HPLC Columns are compatible both with UHPLC and HPLC systems. They are specifically engineered for the fast and high-resolution seperation of biomolecules. These columns operate at high flow rates and have 40% higher efficiency than columns with fully porous particles of the same size. They are stable at high temperatures, which increases the throughput and enhances the peak shape.Recommended productsDiscover LiChropur reagents ideal for HPLC or LC-MS analysisLegal InformationBIOshell is a trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material stainless steel hardware Agency/Method suitable for USP L1 description Shell thickness (0.5 µm), Solid Core (1.7 µm) feature endcapped: no analyte chemical class(es) peptides Торговая марка BIOshell™ extent of labeling 4.6% carbon loading parameter 600 bar max. pressure, 90 °C max. temp. application(s) HPLC: suitable, UHPLC: suitable L x I.D. 15 cm x 2.1 mm surface coverage 2.2 µmol/m2 matrix spherical silica particle platform matrix active group C18 (octadecyl) bonding phase, diisobutyloctadecyl particle size 2.7 µm pore size 160 A surface area 90 m2/g operating pH range 1 - 8 separation technique reversed phase Узнать цену -
BIOshell™ A160 Peptide C18, 2.7 m HPLC Column 66906-U
NACRES: SB.52 General descriptionBIOshell™ 160 Peptide C18 columns are specifically engineered to provide efficient separation of peptides as well as small proteins. These columns contain advanced Fused-Core particles with pores strategically sized to 160 to enable optimized peptide diffusion. This attribute makes these columns an excellent choice for peptide mapping. Additionally, the sterically-protected C18 ligands provide extra stability allowing the columns to be used at an extended pH range (2-9) and high temperatures (up to 90 °C). This greatly expands the application range for the separation of biomolecules.ApplicationUHPLC Analysis of Peptides on BIOshell™ A160 Peptide C18, CN, and Phenyl-Hexyl, 2.7 µmRecommended productsDiscover LiChropur reagents ideal for HPLC or LC-MS analysisLegal InformationBIOshell is a trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material stainless steel hardware Agency/Method suitable for USP L1 description Shell thickness (0.5 µm), Solid Core (1.7 µm) feature endcapped: no analyte chemical class(es) peptides Торговая марка BIOshell™ extent of labeling 4.6% carbon loading parameter 600 bar max. pressure, 90 °C max. temp. application(s) HPLC: suitable, UHPLC: suitable L x I.D. 3 cm x 3 mm surface coverage 2.2 µmol/m2 matrix spherical silica particle platform matrix active group C18 (octadecyl) bonding phase, diisobutyloctadecyl particle size 2.7 µm pore size 160 A surface area 90 m2/g operating pH range 1 - 8 separation technique reversed phase Узнать цену -
BIOshell™ A160 Peptide C18, 2.7 m HPLC Column 66907-U
NACRES: SB.52 General descriptionBIOshell™ 160 Peptide C18 columns are specifically engineered to provide efficient separation of peptides as well as small proteins. These columns contain advanced Fused-Core particles with pores strategically sized to 160 to enable optimized peptide diffusion. This attribute makes these columns an excellent choice for peptide mapping. Additionally, the sterically-protected C18 ligands provide extra stability allowing the columns to be used at an extended pH range (2-9) and high temperatures (up to 90 °C). This greatly expands the application range for the separation of biomolecules.ApplicationUHPLC Analysis of Peptides on BIOshell™ A160 Peptide C18, CN, and Phenyl-Hexyl, 2.7 µmRecommended productsDiscover LiChropur reagents ideal for HPLC or LC-MS analysisLegal InformationBIOshell is a trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material stainless steel hardware Agency/Method suitable for USP L1 description Shell thickness (0.5 µm), Solid Core (1.7 µm) feature endcapped: no analyte chemical class(es) peptides Торговая марка BIOshell™ extent of labeling 4.6% carbon loading parameter 600 bar max. pressure, 90 °C max. temp. application(s) HPLC: suitable, UHPLC: suitable L x I.D. 5 cm x 3 mm surface coverage 2.2 µmol/m2 matrix spherical silica particle platform matrix active group C18 (octadecyl) bonding phase, diisobutyloctadecyl particle size 2.7 µm pore size 160 A surface area 90 m2/g operating pH range 1 - 8 separation technique reversed phase Узнать цену -
BIOshell™ A160 Peptide C18, 2.7 m HPLC Column 66908-U
NACRES: SB.52 General descriptionBIOshell™ 160 Peptide C18 columns are specifically engineered to provide efficient separation of peptides as well as small proteins. These columns contain advanced Fused-Core particles with pores strategically sized to 160 to enable optimized peptide diffusion. This attribute makes these columns an excellent choice for peptide mapping. Additionally, the sterically-protected C18 ligands provide extra stability allowing the columns to be used at an extended pH range (2-9) and high temperatures (up to 90 °C). This greatly expands the application range for the separation of biomolecules.ApplicationUHPLC Analysis of Peptides on BIOshell™ A160 Peptide C18, CN, and Phenyl-Hexyl, 2.7 µmRecommended productsDiscover LiChropur reagents ideal for HPLC or LC-MS analysisLegal InformationBIOshell is a trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material stainless steel hardware Agency/Method suitable for USP L1 description Shell thickness (0.5 µm), Solid Core (1.7 µm) feature endcapped: no analyte chemical class(es) peptides Торговая марка BIOshell™ extent of labeling 4.6% carbon loading parameter 600 bar max. pressure, 90 °C max. temp. application(s) HPLC: suitable, UHPLC: suitable L x I.D. 10 cm x 3 mm surface coverage 2.2 µmol/m2 matrix spherical silica particle platform matrix active group C18 (octadecyl) bonding phase, diisobutyloctadecyl particle size 2.7 µm pore size 160 A surface area 90 m2/g operating pH range 1 - 8 separation technique reversed phase Узнать цену -
BIOshell™ A160 Peptide C18, 2.7 m HPLC Column 66909-U
NACRES: SB.52 General descriptionBIOshell™ 160 Peptide C18 columns are specifically engineered to provide efficient separation of peptides as well as small proteins. These columns contain advanced Fused-Core particles with pores strategically sized to 160 to enable optimized peptide diffusion. This attribute makes these columns an excellent choice for peptide mapping. Additionally, the sterically-protected C18 ligands provide extra stability allowing the columns to be used at an extended pH range (2-9) and high temperatures (up to 90 °C). This greatly expands the application range for the separation of biomolecules.ApplicationUHPLC Analysis of Peptides on BIOshell™ A160 Peptide C18, CN, and Phenyl-Hexyl, 2.7 µmRecommended productsDiscover LiChropur reagents ideal for HPLC or LC-MS analysisLegal InformationBIOshell is a trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material stainless steel hardware Agency/Method suitable for USP L1 description Shell thickness (0.5 µm), Solid Core (1.7 µm) feature endcapped: no analyte chemical class(es) peptides Торговая марка BIOshell™ extent of labeling 4.6% carbon loading parameter 600 bar max. pressure, 90 °C max. temp. application(s) HPLC: suitable, UHPLC: suitable L x I.D. 15 cm x 3 mm surface coverage 2.2 µmol/m2 matrix spherical silica particle platform matrix active group C18 (octadecyl) bonding phase, diisobutyloctadecyl particle size 2.7 µm pore size 160 A surface area 90 m2/g operating pH range 1 - 8 separation technique reversed phase Узнать цену -
BIOshell™ A160 Peptide C18, 2.7 m HPLC Column 66913-U
NACRES: SB.52 General descriptionBIOshell™ 160 Peptide C18 columns are specifically engineered to provide efficient separation of peptides as well as small proteins. These columns contain advanced Fused-Core particles with pores strategically sized to 160 to enable optimized peptide diffusion. This attribute makes these columns an excellent choice for peptide mapping. Additionally, the sterically-protected C18 ligands provide extra stability allowing the columns to be used at an extended pH range (2-9) and high temperatures (up to 90 °C). This greatly expands the application range for the separation of biomolecules.ApplicationUHPLC Analysis of Peptides on BIOshell™ A160 Peptide C18, CN, and Phenyl-Hexyl, 2.7 µmRecommended productsDiscover LiChropur reagents ideal for HPLC or LC-MS analysisLegal InformationBIOshell is a trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material stainless steel hardware Agency/Method suitable for USP L1 description Shell thickness (0.5 µm), Solid Core (1.7 µm) feature endcapped: no analyte chemical class(es) peptides Торговая марка BIOshell™ extent of labeling 4.6% carbon loading parameter 600 bar max. pressure, 90 °C max. temp. application(s) HPLC: suitable, UHPLC: suitable L x I.D. 5 cm x 4.6 mm surface coverage 2.2 µmol/m2 matrix spherical silica particle platform matrix active group C18 (octadecyl) bonding phase, diisobutyloctadecyl particle size 2.7 µm pore size 160 A surface area 90 m2/g operating pH range 1 - 8 separation technique reversed phase Узнать цену -
BIOshell™ A160 Peptide C18, 2.7 m HPLC Column 66915-U
NACRES: SB.52 General descriptionBIOshell™ 160 Peptide C18 columns are specifically engineered to provide efficient separation of peptides as well as small proteins. These columns contain advanced Fused-Core particles with pores strategically sized to 160 to enable optimized peptide diffusion. This attribute makes these columns an excellent choice for peptide mapping. Additionally, the sterically-protected C18 ligands provide extra stability allowing the columns to be used at an extended pH range (2-9) and high temperatures (up to 90 °C). This greatly expands the application range for the separation of biomolecules.ApplicationUHPLC Analysis of Peptides on BIOshell™ A160 Peptide C18, CN, and Phenyl-Hexyl, 2.7 µmRecommended productsDiscover LiChropur reagents ideal for HPLC or LC-MS analysisLegal InformationBIOshell is a trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material stainless steel hardware Agency/Method suitable for USP L1 description Shell thickness (0.5 µm), Solid Core (1.7 µm) feature endcapped: no analyte chemical class(es) peptides Торговая марка BIOshell™ extent of labeling 4.6% carbon loading parameter 600 bar max. pressure, 90 °C max. temp. application(s) HPLC: suitable, UHPLC: suitable L x I.D. 10 cm x 4.6 mm surface coverage 2.2 µmol/m2 matrix spherical silica particle platform matrix active group C18 (octadecyl) bonding phase, diisobutyloctadecyl particle size 2.7 µm pore size 160 A surface area 90 m2/g operating pH range 1 - 8 separation technique reversed phase Узнать цену -
BIOshell™ A160 Peptide C18, 2.7 m HPLC Column 66917-U
NACRES: SB.52 General descriptionBIOshell™ 160 Peptide C18 columns are specifically engineered to provide efficient separation of peptides as well as small proteins. These columns contain advanced Fused-Core particles with pores strategically sized to 160 to enable optimized peptide diffusion. This attribute makes these columns an excellent choice for peptide mapping. Additionally, the sterically-protected C18 ligands provide extra stability allowing the columns to be used at an extended pH range (2-9) and high temperatures (up to 90 °C). This greatly expands the application range for the separation of biomolecules.ApplicationUHPLC Analysis of Peptides on BIOshell™ A160 Peptide C18, CN, and Phenyl-Hexyl, 2.7 µmRecommended productsDiscover LiChropur reagents ideal for HPLC or LC-MS analysisLegal InformationBIOshell is a trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material stainless steel hardware Agency/Method suitable for USP L1 description Shell thickness (0.5 µm), Solid Core (1.7 µm) feature endcapped: no analyte chemical class(es) peptides Торговая марка BIOshell™ extent of labeling 4.6% carbon loading parameter 600 bar max. pressure, 90 °C max. temp. application(s) HPLC: suitable, UHPLC: suitable L x I.D. 15 cm x 4.6 mm surface coverage 2.2 µmol/m2 matrix spherical silica particle platform matrix active group C18 (octadecyl) bonding phase, diisobutyloctadecyl particle size 2.7 µm pore size 160 A surface area 90 m2/g operating pH range 1 - 8 separation technique reversed phase Узнать цену -
BIOshell™ A160 Peptide C18, 2.7 m HPLC Column 67085-U
NACRES: SB.52 General descriptionBIOshell™ 160 Peptide C18 columns are specifically engineered to provide efficient separation of peptides as well as small proteins. These columns contain advanced Fused-Core particles with pores strategically sized to 160 to enable optimized peptide diffusion. This attribute makes these columns an excellent choice for peptide mapping. Additionally, the sterically-protected C18 ligands provide extra stability allowing the columns to be used at an extended pH range (2-9) and high temperatures (up to 90 °C). This greatly expands the application range for the separation of biomolecules.ApplicationUHPLC Analysis of Peptides on BIOshell™ A160 Peptide C18, CN, and Phenyl-Hexyl, 2.7 µmRecommended productsDiscover LiChropur reagents ideal for HPLC or LC-MS analysisLegal InformationBIOshell is a trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material stainless steel hardware Agency/Method suitable for USP L1 description Shell thickness (0.5 µm), Solid Core (1.7 µm) feature endcapped: no analyte chemical class(es) peptides Торговая марка BIOshell™ extent of labeling 4.6% carbon loading parameter 600 bar max. pressure, 90 °C max. temp. application(s) HPLC: suitable, UHPLC: suitable L x I.D. 5 cm x 75 µm surface coverage 2.2 µmol/m2 matrix spherical silica particle platform matrix active group C18 (octadecyl) bonding phase, diisobutyloctadecyl particle size 2.7 µm pore size 160 A surface area 90 m2/g operating pH range 1 - 8 separation technique reversed phase Узнать цену -
BIOshell™ A160 Peptide C18, 2.7 m HPLC Column 67086-U
NACRES: SB.52 General descriptionBIOshell™ 160 Peptide C18 columns are specifically engineered to provide efficient separation of peptides as well as small proteins. These columns contain advanced Fused-Core particles with pores strategically sized to 160 to enable optimized peptide diffusion. This attribute makes these columns an excellent choice for peptide mapping. Additionally, the sterically-protected C18 ligands provide extra stability allowing the columns to be used at an extended pH range (2-9) and high temperatures (up to 90 °C). This greatly expands the application range for the separation of biomolecules.ApplicationUHPLC Analysis of Peptides on BIOshell™ A160 Peptide C18, CN, and Phenyl-Hexyl, 2.7 µmRecommended productsDiscover LiChropur reagents ideal for HPLC or LC-MS analysisLegal InformationBIOshell is a trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material stainless steel hardware Agency/Method suitable for USP L1 description Shell thickness (0.5 µm), Solid Core (1.7 µm) feature endcapped: no analyte chemical class(es) peptides Торговая марка BIOshell™ extent of labeling 4.6% carbon loading parameter 600 bar max. pressure, 90 °C max. temp. application(s) HPLC: suitable, UHPLC: suitable L x I.D. 15 cm x 75 µm surface coverage 2.2 µmol/m2 matrix spherical silica particle platform matrix active group C18 (octadecyl) bonding phase, diisobutyloctadecyl particle size 2.7 µm pore size 160 A surface area 90 m2/g operating pH range 1 - 8 separation technique reversed phase Узнать цену -
BIOshell™ A160 Peptide C18, 2.7 m HPLC Column 67087-U
NACRES: SB.52 General descriptionBIOshell™ 160 Peptide C18 columns are specifically engineered to provide efficient separation of peptides as well as small proteins. These columns contain advanced Fused-Core particles with pores strategically sized to 160 to enable optimized peptide diffusion. This attribute makes these columns an excellent choice for peptide mapping. Additionally, the sterically-protected C18 ligands provide extra stability allowing the columns to be used at an extended pH range (2-9) and high temperatures (up to 90 °C). This greatly expands the application range for the separation of biomolecules.ApplicationUHPLC Analysis of Peptides on BIOshell™ A160 Peptide C18, CN, and Phenyl-Hexyl, 2.7 µmRecommended productsDiscover LiChropur reagents ideal for HPLC or LC-MS analysisLegal InformationBIOshell is a trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material stainless steel hardware Agency/Method suitable for USP L1 description Shell thickness (0.5 µm), Solid Core (1.7 µm) feature endcapped: no analyte chemical class(es) peptides Торговая марка BIOshell™ extent of labeling 4.6% carbon loading parameter 600 bar max. pressure, 90 °C max. temp. application(s) HPLC: suitable, UHPLC: suitable L x I.D. 5 cm x 100 µm surface coverage 2.2 µmol/m2 matrix spherical silica particle platform matrix active group C18 (octadecyl) bonding phase, diisobutyloctadecyl particle size 2.7 µm pore size 160 A surface area 90 m2/g operating pH range 1 - 8 separation technique reversed phase Узнать цену -
BIOshell™ A160 Peptide C18, 2.7 m HPLC Column 67088-U
NACRES: SB.52 General descriptionBIOshell™ 160 Peptide C18 columns are specifically engineered to provide efficient separation of peptides as well as small proteins. These columns contain advanced Fused-Core particles with pores strategically sized to 160 to enable optimized peptide diffusion. This attribute makes these columns an excellent choice for peptide mapping. Additionally, the sterically-protected C18 ligands provide extra stability allowing the columns to be used at an extended pH range (2-9) and high temperatures (up to 90 °C). This greatly expands the application range for the separation of biomolecules.ApplicationUHPLC Analysis of Peptides on BIOshell™ A160 Peptide C18, CN, and Phenyl-Hexyl, 2.7 µmRecommended productsDiscover LiChropur reagents ideal for HPLC or LC-MS analysisLegal InformationBIOshell is a trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material stainless steel hardware Agency/Method suitable for USP L1 description Shell thickness (0.5 µm), Solid Core (1.7 µm) feature endcapped: no analyte chemical class(es) peptides Торговая марка BIOshell™ extent of labeling 4.6% carbon loading parameter 600 bar max. pressure, 90 °C max. temp. application(s) HPLC: suitable, UHPLC: suitable L x I.D. 15 cm x 100 µm surface coverage 2.2 µmol/m2 matrix spherical silica particle platform matrix active group C18 (octadecyl) bonding phase, diisobutyloctadecyl particle size 2.7 µm pore size 160 A surface area 90 m2/g operating pH range 1 - 8 separation technique reversed phase Узнать цену -
BIOshell™ A160 Peptide C18, 2.7 m HPLC Column 67089-U
NACRES: SB.52 General descriptionBIOshell™ 160 Peptide C18 columns are specifically engineered to provide efficient separation of peptides as well as small proteins. These columns contain advanced Fused-Core particles with pores strategically sized to 160 to enable optimized peptide diffusion. This attribute makes these columns an excellent choice for peptide mapping. Additionally, the sterically-protected C18 ligands provide extra stability allowing the columns to be used at an extended pH range (2-9) and high temperatures (up to 90 °C). This greatly expands the application range for the separation of biomolecules.ApplicationUHPLC Analysis of Peptides on BIOshell™ A160 Peptide C18, CN, and Phenyl-Hexyl, 2.7 µmRecommended productsDiscover LiChropur reagents ideal for HPLC or LC-MS analysisLegal InformationBIOshell is a trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material stainless steel hardware Agency/Method suitable for USP L1 description Shell thickness (0.5 µm), Solid Core (1.7 µm) feature endcapped: no analyte chemical class(es) peptides Торговая марка BIOshell™ extent of labeling 4.6% carbon loading parameter 600 bar max. pressure, 90 °C max. temp. application(s) HPLC: suitable, UHPLC: suitable L x I.D. 5 cm x 200 µm surface coverage 2.2 µmol/m2 matrix spherical silica particle platform matrix active group C18 (octadecyl) bonding phase, diisobutyloctadecyl particle size 2.7 µm pore size 160 A surface area 90 m2/g operating pH range 1 - 8 separation technique reversed phase Узнать цену -
BIOshell™ A160 Peptide C18, 2.7 m HPLC Column 67091-U
NACRES: SB.52 General descriptionBIOshell™ 160 Peptide C18 columns are specifically engineered to provide efficient separation of peptides as well as small proteins. These columns contain advanced Fused-Core particles with pores strategically sized to 160 to enable optimized peptide diffusion. This attribute makes these columns an excellent choice for peptide mapping. Additionally, the sterically-protected C18 ligands provide extra stability allowing the columns to be used at an extended pH range (2-9) and high temperatures (up to 90 °C). This greatly expands the application range for the separation of biomolecules.ApplicationUHPLC Analysis of Peptides on BIOshell™ A160 Peptide C18, CN, and Phenyl-Hexyl, 2.7 µmRecommended productsDiscover LiChropur reagents ideal for HPLC or LC-MS analysisLegal InformationBIOshell is a trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material stainless steel hardware Agency/Method suitable for USP L1 description Shell thickness (0.5 µm), Solid Core (1.7 µm) feature endcapped: no analyte chemical class(es) peptides Торговая марка BIOshell™ extent of labeling 4.6% carbon loading parameter 600 bar max. pressure, 90 °C max. temp. application(s) HPLC: suitable, UHPLC: suitable L x I.D. 15 cm x 200 µm surface coverage 2.2 µmol/m2 matrix spherical silica particle platform matrix active group C18 (octadecyl) bonding phase, diisobutyloctadecyl particle size 2.7 µm pore size 160 A surface area 90 m2/g operating pH range 1 - 8 separation technique reversed phase Узнать цену -
BIOshell™ A160 Peptide C18, 2.7 m HPLC Column 67092-U
NACRES: SB.52 General descriptionBIOshell™ 160 Peptide C18 columns are specifically engineered to provide efficient separation of peptides as well as small proteins. These columns contain advanced Fused-Core particles with pores strategically sized to 160 to enable optimized peptide diffusion. This attribute makes these columns an excellent choice for peptide mapping. Additionally, the sterically-protected C18 ligands provide extra stability allowing the columns to be used at an extended pH range (2-9) and high temperatures (up to 90 °C). This greatly expands the application range for the separation of biomolecules.ApplicationUHPLC Analysis of Peptides on BIOshell™ A160 Peptide C18, CN, and Phenyl-Hexyl, 2.7 µmRecommended productsDiscover LiChropur reagents ideal for HPLC or LC-MS analysisLegal InformationBIOshell is a trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material stainless steel hardware Agency/Method suitable for USP L1 description Shell thickness (0.5 µm), Solid Core (1.7 µm) feature endcapped: no analyte chemical class(es) peptides Торговая марка BIOshell™ extent of labeling 4.6% carbon loading parameter 600 bar max. pressure, 90 °C max. temp. application(s) HPLC: suitable, UHPLC: suitable L x I.D. 5 cm x 300 µm surface coverage 2.2 µmol/m2 matrix spherical silica particle platform matrix active group C18 (octadecyl) bonding phase, diisobutyloctadecyl particle size 2.7 µm pore size 160 A surface area 90 m2/g operating pH range 1 - 8 separation technique reversed phase Узнать цену -
BIOshell™ A160 Peptide C18, 2.7 m HPLC Column 67093-U
NACRES: SB.52 General descriptionBIOshell™ 160 Peptide C18 columns are specifically engineered to provide efficient separation of peptides as well as small proteins. These columns contain advanced Fused-Core particles with pores strategically sized to 160 to enable optimized peptide diffusion. This attribute makes these columns an excellent choice for peptide mapping. Additionally, the sterically-protected C18 ligands provide extra stability allowing the columns to be used at an extended pH range (2-9) and high temperatures (up to 90 °C). This greatly expands the application range for the separation of biomolecules.ApplicationUHPLC Analysis of Peptides on BIOshell™ A160 Peptide C18, CN, and Phenyl-Hexyl, 2.7 µmRecommended productsDiscover LiChropur reagents ideal for HPLC or LC-MS analysisLegal InformationBIOshell is a trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material stainless steel hardware Agency/Method suitable for USP L1 description Shell thickness (0.5 µm), Solid Core (1.7 µm) feature endcapped: no analyte chemical class(es) peptides Торговая марка BIOshell™ extent of labeling 4.6% carbon loading parameter 600 bar max. pressure, 90 °C max. temp. application(s) HPLC: suitable, UHPLC: suitable L x I.D. 15 cm x 300 µm surface coverage 2.2 µmol/m2 matrix spherical silica particle platform matrix active group C18 (octadecyl) bonding phase, diisobutyloctadecyl particle size 2.7 µm pore size 160 A surface area 90 m2/g operating pH range 1 - 8 separation technique reversed phase Узнать цену -
BIOshell™ A160 Peptide C18, 2.7 m HPLC Column 67095-U
NACRES: SB.52 General descriptionBIOshell™ 160 Peptide C18 columns are specifically engineered to provide efficient separation of peptides as well as small proteins. These columns contain advanced Fused-Core particles with pores strategically sized to 160 to enable optimized peptide diffusion. This attribute makes these columns an excellent choice for peptide mapping. Additionally, the sterically-protected C18 ligands provide extra stability allowing the columns to be used at an extended pH range (2-9) and high temperatures (up to 90 °C). This greatly expands the application range for the separation of biomolecules.ApplicationUHPLC Analysis of Peptides on BIOshell™ A160 Peptide C18, CN, and Phenyl-Hexyl, 2.7 µmRecommended productsDiscover LiChropur reagents ideal for HPLC or LC-MS analysisLegal InformationBIOshell is a trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material stainless steel hardware Agency/Method suitable for USP L1 description Shell thickness (0.5 µm), Solid Core (1.7 µm) feature endcapped: no analyte chemical class(es) peptides Торговая марка BIOshell™ extent of labeling 4.6% carbon loading parameter 600 bar max. pressure, 90 °C max. temp. application(s) HPLC: suitable, UHPLC: suitable L x I.D. 5 cm x 500 µm surface coverage 2.2 µmol/m2 matrix spherical silica particle platform matrix active group C18 (octadecyl) bonding phase, diisobutyloctadecyl particle size 2.7 µm pore size 160 A surface area 90 m2/g operating pH range 1 - 8 separation technique reversed phase Узнать цену -
BIOshell™ A160 Peptide C18, 2.7 m HPLC Column 67096-U
NACRES: SB.52 General descriptionBIOshell™ 160 Peptide C18 columns are specifically engineered to provide efficient separation of peptides as well as small proteins. These columns contain advanced Fused-Core particles with pores strategically sized to 160 to enable optimized peptide diffusion. This attribute makes these columns an excellent choice for peptide mapping. Additionally, the sterically-protected C18 ligands provide extra stability allowing the columns to be used at an extended pH range (2-9) and high temperatures (up to 90 °C). This greatly expands the application range for the separation of biomolecules.ApplicationUHPLC Analysis of Peptides on BIOshell™ A160 Peptide C18, CN, and Phenyl-Hexyl, 2.7 µmRecommended productsDiscover LiChropur reagents ideal for HPLC or LC-MS analysisLegal InformationBIOshell is a trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material stainless steel hardware Agency/Method suitable for USP L1 description Shell thickness (0.5 µm), Solid Core (1.7 µm) feature endcapped: no analyte chemical class(es) peptides Торговая марка BIOshell™ extent of labeling 4.6% carbon loading parameter 600 bar max. pressure, 90 °C max. temp. application(s) HPLC: suitable, UHPLC: suitable L x I.D. 10 cm x 500 µm surface coverage 2.2 µmol/m2 matrix spherical silica particle platform matrix active group C18 (octadecyl) bonding phase, diisobutyloctadecyl particle size 2.7 µm pore size 160 A surface area 90 m2/g operating pH range 1 - 8 separation technique reversed phase Узнать цену -
BIOshell™ A160 Peptide C18, 2.7 m HPLC Column 67097-U
NACRES: SB.52 General descriptionBIOshell™ 160 Peptide C18 columns are specifically engineered to provide efficient separation of peptides as well as small proteins. These columns contain advanced Fused-Core particles with pores strategically sized to 160 to enable optimized peptide diffusion. This attribute makes these columns an excellent choice for peptide mapping. Additionally, the sterically-protected C18 ligands provide extra stability allowing the columns to be used at an extended pH range (2-9) and high temperatures (up to 90 °C). This greatly expands the application range for the separation of biomolecules.ApplicationUHPLC Analysis of Peptides on BIOshell™ A160 Peptide C18, CN, and Phenyl-Hexyl, 2.7 µmLegal InformationBIOshell is a trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material stainless steel hardware Agency/Method suitable for USP L1 description Shell thickness (0.5 µm), Solid Core (1.7 µm) feature endcapped: no analyte chemical class(es) peptides Торговая марка BIOshell™ extent of labeling 4.6% carbon loading parameter 600 bar max. pressure, 90 °C max. temp. application(s) HPLC: suitable, UHPLC: suitable L x I.D. 15 cm x 500 µm surface coverage 2.2 µmol/m2 matrix spherical silica particle platform matrix active group C18 (octadecyl) bonding phase, diisobutyloctadecyl particle size 2.7 µm pore size 160 A surface area 90 m2/g operating pH range 1 - 8 separation technique reversed phase Узнать цену -
BIOshell™ A160 Peptide C18, 2.7 m HPLC Column 67098-U
NACRES: SB.52 General descriptionBIOshell™ 160 Peptide C18 columns are specifically engineered to provide efficient separation of peptides as well as small proteins. These columns contain advanced Fused-Core particles with pores strategically sized to 160 to enable optimized peptide diffusion. This attribute makes these columns an excellent choice for peptide mapping. Additionally, the sterically-protected C18 ligands provide extra stability allowing the columns to be used at an extended pH range (2-9) and high temperatures (up to 90 °C). This greatly expands the application range for the separation of biomolecules.ApplicationUHPLC Analysis of Peptides on BIOshell™ A160 Peptide C18, CN, and Phenyl-Hexyl, 2.7 µmLegal InformationBIOshell is a trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material stainless steel hardware Agency/Method suitable for USP L1 description Shell thickness (0.5 µm), Solid Core (1.7 µm) feature endcapped: no analyte chemical class(es) peptides Торговая марка BIOshell™ extent of labeling 4.6% carbon loading parameter 600 bar max. pressure, 90 °C max. temp. application(s) HPLC: suitable, UHPLC: suitable L x I.D. 5 cm x 1 mm surface coverage 2.2 µmol/m2 matrix spherical silica particle platform matrix active group C18 (octadecyl) bonding phase, diisobutyloctadecyl particle size 2.7 µm pore size 160 A surface area 90 m2/g operating pH range 1 - 8 separation technique reversed phase Узнать цену -
BIOshell™ A160 Peptide C18, 2.7 m HPLC Column 67099-U
NACRES: SB.52 General descriptionBIOshell™ 160 Peptide C18 columns are specifically engineered to provide efficient separation of peptides as well as small proteins. These columns contain advanced Fused-Core particles with pores strategically sized to 160 to enable optimized peptide diffusion. This attribute makes these columns an excellent choice for peptide mapping. Additionally, the sterically-protected C18 ligands provide extra stability allowing the columns to be used at an extended pH range (2-9) and high temperatures (up to 90 °C). This greatly expands the application range for the separation of biomolecules.ApplicationUHPLC Analysis of Peptides on BIOshell™ A160 Peptide C18, CN, and Phenyl-Hexyl, 2.7 µmLegal InformationBIOshell is a trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material stainless steel hardware Agency/Method suitable for USP L1 description Shell thickness (0.5 µm), Solid Core (1.7 µm) feature endcapped: no analyte chemical class(es) peptides Торговая марка BIOshell™ extent of labeling 4.6% carbon loading parameter 600 bar max. pressure, 90 °C max. temp. application(s) HPLC: suitable, UHPLC: suitable L x I.D. 15 cm x 1 mm surface coverage 2.2 µmol/m2 matrix spherical silica particle platform matrix active group C18 (octadecyl) bonding phase, diisobutyloctadecyl particle size 2.7 µm pore size 160 A surface area 90 m2/g operating pH range 1 - 8 separation technique reversed phase Узнать цену -
BIOshell™ A160 Peptide C18, 5 m Guard Cartridge 67016-U
NACRES: SB.52 General descriptionBIOshell™ Guard Columns provide physical (filtration) and chemical protection for costly analytical columns without compromising the very high performance of BIOshell columns. These BIOshell guard columns are capable of continuous use at pressures up to 9000 psi (600 bar) with only hand-tightening. Guard cartridges are easily replaced without removing the guard column holder from the flow path. The cartridge is packed with BIOshell Fused-Core particles. Order the guard column holder (66841-U) separately.Recommended productsDiscover LiChropur reagents ideal for HPLC or LC-MS analysisLegal InformationBIOshell is a trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material stainless steel hardware (guard cartridge) Agency/Method suitable for USP L1 description Shell thickness (0.6 µm), Solid Core (3.5 µm) feature endcapped: no packaging pkg of 3 ea extent of labeling 4.0% carbon loading parameter 600 bar max. pressure, 90 °C max. temp. application(s) HPLC: suitable L x I.D. 0.5 cm x 2.1 mm surface coverage 2.2 µmol/m2 matrix spherical silica particle platform matrix active group C18 (octadecyl) phase particle size 5.0 µm pore size 160 A surface area 60 m2/g operating pH range 1 - 8 separation technique reversed phase Узнать цену -
BIOshell™ A160 Peptide C18, 5 m Guard Cartridge 67017-U
NACRES: SB.52 General descriptionBIOshell™ Guard Columns provide physical (filtration) and chemical protection for costly analytical columns without compromising the very high performance of BIOshell columns. These BIOshell guard columns are capable of continuous use at pressures up to 9000 psi (600 bar) with only hand-tightening. Guard cartridges are easily replaced without removing the guard column holder from the flow path. The cartridge is packed with BIOshell Fused-Core particles. Order the guard column holder (66841-U) separately.Recommended productsDiscover LiChropur reagents ideal for HPLC or LC-MS analysisLegal InformationBIOshell is a trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material stainless steel hardware (guard cartridge) Agency/Method suitable for USP L1 description Shell thickness (0.6 µm), Solid Core (3.5 µm) feature endcapped: no packaging pkg of 3 ea extent of labeling 4.0% carbon loading parameter 600 bar max. pressure, 90 °C max. temp. application(s) HPLC: suitable L x I.D. 0.5 cm x 3 mm surface coverage 2.2 µmol/m2 matrix spherical silica particle platform matrix active group C18 (octadecyl) phase particle size 5.0 µm pore size 160 A surface area 60 m2/g operating pH range 1 - 8 separation technique reversed phase Узнать цену -
BIOshell™ A160 Peptide C18, 5 m Guard Cartridge 67018-U
NACRES: SB.52 General descriptionBIOshell™ Guard Columns provide physical (filtration) and chemical protection for costly analytical columns without compromising the very high performance of BIOshell columns. These BIOshell guard columns are capable of continuous use at pressures up to 9000 psi (600 bar) with only hand-tightening. Guard cartridges are easily replaced without removing the guard column holder from the flow path. The cartridge is packed with BIOshell Fused-Core particles. Order the guard column holder (66841-U) separately.Recommended productsDiscover LiChropur reagents ideal for HPLC or LC-MS analysisLegal InformationBIOshell is a trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material stainless steel hardware (guard cartridge) Agency/Method suitable for USP L1 description Shell thickness (0.6 µm), Solid Core (3.5 µm) feature endcapped: no packaging pkg of 3 ea extent of labeling 4.0% carbon loading parameter 600 bar max. pressure, 90 °C max. temp. application(s) HPLC: suitable L x I.D. 0.5 cm x 4.6 mm surface coverage 2.2 µmol/m2 matrix spherical silica particle platform matrix active group C18 (octadecyl) phase particle size 5.0 µm pore size 160 A surface area 60 m2/g operating pH range 1 - 8 separation technique reversed phase Узнать цену -
BIOshell™ A160 Peptide C18, 5 m HPLC Column 67001-U
NACRES: SB.52 General descriptionBIOshell™ 160 Peptide C18 columns are specifically engineered to provide efficient separation of peptides as well as small proteins. These columns contain advanced Fused-Core particles with pores strategically sized to 160 to enable optimized peptide diffusion. This attribute makes these columns an excellent choice for peptide mapping. Additionally, the sterically-protected C18 ligands provide extra stability allowing the columns to be used at an extended pH range (2-9) and high temperatures (up to 90 °C). This greatly expands the application range for the separation of biomolecules.Recommended productsDiscover LiChropur reagents ideal for HPLC or LC-MS analysisLegal InformationBIOshell is a trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material stainless steel hardware (column) Agency/Method suitable for USP L1 description Shell thickness (0.6 µm), Solid Core (3.5 µm) feature endcapped: no analyte chemical class(es) peptides Торговая марка BIOshell™ extent of labeling 4.0% carbon loading parameter 600 bar max. pressure, 90 °C max. temp. application(s) HPLC: suitable L x I.D. 3 cm x 2.1 mm surface coverage 2.2 µmol/m2 matrix particle platform matrix active group C18 (octadecyl) phase particle size 5.0 µm pore size 160 A surface area 60 m2/g operating pH range 1 - 8 separation technique reversed phase Узнать цену -
BIOshell™ A160 Peptide C18, 5 m HPLC Column 67002-U
NACRES: SB.52 General descriptionBIOshell™ 160 Peptide C18 columns are specifically engineered to provide efficient separation of peptides as well as small proteins. These columns contain advanced Fused-Core particles with pores strategically sized to 160 to enable optimized peptide diffusion. This attribute makes these columns an excellent choice for peptide mapping. Additionally, the sterically-protected C18 ligands provide extra stability allowing the columns to be used at an extended pH range (2-9) and high temperatures (up to 90 °C). This greatly expands the application range for the separation of biomolecules.Recommended productsDiscover LiChropur reagents ideal for HPLC or LC-MS analysisLegal InformationBIOshell is a trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material stainless steel hardware (column) Agency/Method suitable for USP L1 description Shell thickness (0.6 µm), Solid Core (3.5 µm) feature endcapped: no analyte chemical class(es) peptides Торговая марка BIOshell™ extent of labeling 4.0% carbon loading parameter 600 bar max. pressure, 90 °C max. temp. application(s) HPLC: suitable L x I.D. 5 cm x 2.1 mm surface coverage 2.2 µmol/m2 matrix particle platform matrix active group C18 (octadecyl) phase particle size 5.0 µm pore size 160 A surface area 60 m2/g operating pH range 1 - 8 separation technique reversed phase Узнать цену -
BIOshell™ A160 Peptide C18, 5 m HPLC Column 67003-U
NACRES: SB.52 General descriptionBIOshell™ 160 Peptide C18 columns are specifically engineered to provide efficient separation of peptides as well as small proteins. These columns contain advanced Fused-Core particles with pores strategically sized to 160 to enable optimized peptide diffusion. This attribute makes these columns an excellent choice for peptide mapping. Additionally, the sterically-protected C18 ligands provide extra stability allowing the columns to be used at an extended pH range (2-9) and high temperatures (up to 90 °C). This greatly expands the application range for the separation of biomolecules.Recommended productsDiscover LiChropur reagents ideal for HPLC or LC-MS analysisLegal InformationBIOshell is a trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material stainless steel hardware (column) Agency/Method suitable for USP L1 description Shell thickness (0.6 µm), Solid Core (3.5 µm) feature endcapped: no analyte chemical class(es) peptides Торговая марка BIOshell™ extent of labeling 4.0% carbon loading parameter 600 bar max. pressure, 90 °C max. temp. application(s) HPLC: suitable L x I.D. 7.5 cm x 2.1 mm surface coverage 2.2 µmol/m2 matrix particle platform matrix active group C18 (octadecyl) phase particle size 5.0 µm pore size 160 A surface area 60 m2/g operating pH range 1 - 8 separation technique reversed phase Узнать цену -
BIOshell™ A160 Peptide C18, 5 m HPLC Column 67004-U
NACRES: SB.52 General descriptionBIOshell™ 160 Peptide C18 columns are specifically engineered to provide efficient separation of peptides as well as small proteins. These columns contain advanced Fused-Core particles with pores strategically sized to 160 to enable optimized peptide diffusion. This attribute makes these columns an excellent choice for peptide mapping. Additionally, the sterically-protected C18 ligands provide extra stability allowing the columns to be used at an extended pH range (2-9) and high temperatures (up to 90 °C). This greatly expands the application range for the separation of biomolecules.Recommended productsDiscover LiChropur reagents ideal for HPLC or LC-MS analysisLegal InformationBIOshell is a trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material stainless steel hardware (column) Agency/Method suitable for USP L1 description Shell thickness (0.6 µm), Solid Core (3.5 µm) feature endcapped: no analyte chemical class(es) peptides Торговая марка BIOshell™ extent of labeling 4.0% carbon loading parameter 600 bar max. pressure, 90 °C max. temp. application(s) HPLC: suitable L x I.D. 10 cm x 2.1 mm surface coverage 2.2 µmol/m2 matrix particle platform matrix active group C18 (octadecyl) phase particle size 5.0 µm pore size 160 A surface area 60 m2/g operating pH range 1 - 8 separation technique reversed phase Узнать цену -
BIOshell™ A160 Peptide C18, 5 m HPLC Column 67006-U
NACRES: SB.52 General descriptionBIOshell™ 160 Peptide C18 columns are specifically engineered to provide efficient separation of peptides as well as small proteins. These columns contain advanced Fused-Core particles with pores strategically sized to 160 to enable optimized peptide diffusion. This attribute makes these columns an excellent choice for peptide mapping. Additionally, the sterically-protected C18 ligands provide extra stability allowing the columns to be used at an extended pH range (2-9) and high temperatures (up to 90 °C). This greatly expands the application range for the separation of biomolecules.Recommended productsDiscover LiChropur reagents ideal for HPLC or LC-MS analysisLegal InformationBIOshell is a trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material stainless steel hardware (column) Agency/Method suitable for USP L1 description Shell thickness (0.6 µm), Solid Core (3.5 µm) feature endcapped: no analyte chemical class(es) peptides Торговая марка BIOshell™ extent of labeling 4.0% carbon loading parameter 600 bar max. pressure, 90 °C max. temp. application(s) HPLC: suitable L x I.D. 15 cm x 2.1 mm surface coverage 2.2 µmol/m2 matrix particle platform matrix active group C18 (octadecyl) phase particle size 5.0 µm pore size 160 A surface area 60 m2/g operating pH range 1 - 8 separation technique reversed phase Узнать цену -
BIOshell™ A160 Peptide C18, 5 m HPLC Column 67007-U
NACRES: SB.52 General descriptionBIOshell™ 160 Peptide C18 columns are specifically engineered to provide efficient separation of peptides as well as small proteins. These columns contain advanced Fused-Core particles with pores strategically sized to 160 to enable optimized peptide diffusion. This attribute makes these columns an excellent choice for peptide mapping. Additionally, the sterically-protected C18 ligands provide extra stability allowing the columns to be used at an extended pH range (2-9) and high temperatures (up to 90 °C). This greatly expands the application range for the separation of biomolecules.Recommended productsDiscover LiChropur reagents ideal for HPLC or LC-MS analysisLegal InformationBIOshell is a trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material stainless steel hardware (column) Agency/Method suitable for USP L1 description Shell thickness (0.6 µm), Solid Core (3.5 µm) feature endcapped: no analyte chemical class(es) peptides Торговая марка BIOshell™ extent of labeling 4.0% carbon loading parameter 600 bar max. pressure, 90 °C max. temp. application(s) HPLC: suitable L x I.D. 3 cm x 3 mm surface coverage 2.2 µmol/m2 matrix particle platform matrix active group C18 (octadecyl) phase particle size 5.0 µm pore size 160 A surface area 60 m2/g operating pH range 1 - 8 separation technique reversed phase Узнать цену -
BIOshell™ A160 Peptide C18, 5 m HPLC Column 67008-U
NACRES: SB.52 General descriptionBIOshell™ 160 Peptide C18 columns are specifically engineered to provide efficient separation of peptides as well as small proteins. These columns contain advanced Fused-Core particles with pores strategically sized to 160 to enable optimized peptide diffusion. This attribute makes these columns an excellent choice for peptide mapping. Additionally, the sterically-protected C18 ligands provide extra stability allowing the columns to be used at an extended pH range (2-9) and high temperatures (up to 90 °C). This greatly expands the application range for the separation of biomolecules.Recommended productsDiscover LiChropur reagents ideal for HPLC or LC-MS analysisLegal InformationBIOshell is a trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material stainless steel hardware (column) Agency/Method suitable for USP L1 description Shell thickness (0.6 µm), Solid Core (3.5 µm) feature endcapped: no analyte chemical class(es) peptides Торговая марка BIOshell™ extent of labeling 4.0% carbon loading parameter 600 bar max. pressure, 90 °C max. temp. application(s) HPLC: suitable L x I.D. 5 cm x 3 mm surface coverage 2.2 µmol/m2 matrix particle platform matrix active group C18 (octadecyl) phase particle size 5.0 µm pore size 160 A surface area 60 m2/g operating pH range 1 - 8 separation technique reversed phase Узнать цену -
BIOshell™ A160 Peptide C18, 5 m HPLC Column 67011-U
NACRES: SB.52 General descriptionBIOshell™ 160 Peptide C18 columns are specifically engineered to provide efficient separation of peptides as well as small proteins. These columns contain advanced Fused-Core particles with pores strategically sized to 160 to enable optimized peptide diffusion. This attribute makes these columns an excellent choice for peptide mapping. Additionally, the sterically-protected C18 ligands provide extra stability allowing the columns to be used at an extended pH range (2-9) and high temperatures (up to 90 °C). This greatly expands the application range for the separation of biomolecules.Recommended productsDiscover LiChropur reagents ideal for HPLC or LC-MS analysisLegal InformationBIOshell is a trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material stainless steel hardware (column) Agency/Method suitable for USP L1 description Shell thickness (0.6 µm), Solid Core (3.5 µm) feature endcapped: no analyte chemical class(es) peptides Торговая марка BIOshell™ extent of labeling 4.0% carbon loading parameter 600 bar max. pressure, 90 °C max. temp. application(s) HPLC: suitable L x I.D. 10 cm x 3 mm surface coverage 2.2 µmol/m2 matrix particle platform matrix active group C18 (octadecyl) phase particle size 5.0 µm pore size 160 A surface area 60 m2/g operating pH range 1 - 8 separation technique reversed phase Узнать цену -
BIOshell™ A160 Peptide C18, 5 m HPLC Column 67012-U
NACRES: SB.52 General descriptionBIOshell™ 160 Peptide C18 columns are specifically engineered to provide efficient separation of peptides as well as small proteins. These columns contain advanced Fused-Core particles with pores strategically sized to 160 to enable optimized peptide diffusion. This attribute makes these columns an excellent choice for peptide mapping. Additionally, the sterically-protected C18 ligands provide extra stability allowing the columns to be used at an extended pH range (2-9) and high temperatures (up to 90 °C). This greatly expands the application range for the separation of biomolecules.Recommended productsDiscover LiChropur reagents ideal for HPLC or LC-MS analysisLegal InformationBIOshell is a trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material stainless steel hardware (column) Agency/Method suitable for USP L1 description Shell thickness (0.6 µm), Solid Core (3.5 µm) feature endcapped: no analyte chemical class(es) peptides Торговая марка BIOshell™ extent of labeling 4.0% carbon loading parameter 600 bar max. pressure, 90 °C max. temp. application(s) HPLC: suitable L x I.D. 15 cm x 3 mm surface coverage 2.2 µmol/m2 matrix particle platform matrix active group C18 (octadecyl) phase particle size 5.0 µm pore size 160 A surface area 60 m2/g operating pH range 1 - 8 separation technique reversed phase Узнать цену -
BIOshell™ A160 Peptide C18, 5 m HPLC Column 67013-U
NACRES: SB.52 General descriptionBIOshell™ 160 Peptide C18 columns are specifically engineered to provide efficient separation of peptides as well as small proteins. These columns contain advanced Fused-Core particles with pores strategically sized to 160 to enable optimized peptide diffusion. This attribute makes these columns an excellent choice for peptide mapping. Additionally, the sterically-protected C18 ligands provide extra stability allowing the columns to be used at an extended pH range (2-9) and high temperatures (up to 90 °C). This greatly expands the application range for the separation of biomolecules.Recommended productsDiscover LiChropur reagents ideal for HPLC or LC-MS analysisLegal InformationBIOshell is a trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material stainless steel hardware (column) Agency/Method suitable for USP L1 description Shell thickness (0.6 µm), Solid Core (3.5 µm) feature endcapped: no analyte chemical class(es) peptides Торговая марка BIOshell™ extent of labeling 4.0% carbon loading parameter 600 bar max. pressure, 90 °C max. temp. application(s) HPLC: suitable L x I.D. 5 cm x 4.6 mm surface coverage 2.2 µmol/m2 matrix particle platform matrix active group C18 (octadecyl) phase particle size 5.0 µm pore size 160 A surface area 60 m2/g operating pH range 1 - 8 separation technique reversed phase Узнать цену -
BIOshell™ A160 Peptide C18, 5 m HPLC Column 67014-U
NACRES: SB.52 General descriptionBIOshell™ 160 Peptide C18 columns are specifically engineered to provide efficient separation of peptides as well as small proteins. These columns contain advanced Fused-Core particles with pores strategically sized to 160 to enable optimized peptide diffusion. This attribute makes these columns an excellent choice for peptide mapping. Additionally, the sterically-protected C18 ligands provide extra stability allowing the columns to be used at an extended pH range (2-9) and high temperatures (up to 90 °C). This greatly expands the application range for the separation of biomolecules.Recommended productsDiscover LiChropur reagents ideal for HPLC or LC-MS analysisLegal InformationBIOshell is a trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material stainless steel hardware (column) Agency/Method suitable for USP L1 description Shell thickness (0.6 µm), Solid Core (3.5 µm) feature endcapped: no analyte chemical class(es) peptides Торговая марка BIOshell™ extent of labeling 4.0% carbon loading parameter 600 bar max. pressure, 90 °C max. temp. application(s) HPLC: suitable L x I.D. 10 cm x 4.6 mm surface coverage 2.2 µmol/m2 matrix particle platform matrix active group C18 (octadecyl) phase particle size 5.0 µm pore size 160 A surface area 60 m2/g operating pH range 1 - 8 separation technique reversed phase Узнать цену -
BIOshell™ A160 Peptide C18, 5 m HPLC Column 67015-U
NACRES: SB.52 General descriptionBIOshell™ 160 Peptide C18 columns are specifically engineered to provide efficient separation of peptides as well as small proteins. These columns contain advanced Fused-Core particles with pores strategically sized to 160 to enable optimized peptide diffusion. This attribute makes these columns an excellent choice for peptide mapping. Additionally, the sterically-protected C18 ligands provide extra stability allowing the columns to be used at an extended pH range (2-9) and high temperatures (up to 90 °C). This greatly expands the application range for the separation of biomolecules.Recommended productsDiscover LiChropur reagents ideal for HPLC or LC-MS analysisLegal InformationBIOshell is a trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material stainless steel hardware (column) Agency/Method suitable for USP L1 description Shell thickness (0.6 µm), Solid Core (3.5 µm) feature endcapped: no analyte chemical class(es) peptides Торговая марка BIOshell™ extent of labeling 4.0% carbon loading parameter 600 bar max. pressure, 90 °C max. temp. application(s) HPLC: suitable L x I.D. 15 cm x 4.6 mm surface coverage 2.2 µmol/m2 matrix particle platform matrix active group C18 (octadecyl) phase particle size 5.0 µm pore size 160 A surface area 60 m2/g operating pH range 1 - 8 separation technique reversed phase Узнать цену -
BIOshell™ A160 Peptide C18, 5 m HPLC Column 67201-U
NACRES: SB.52 General descriptionBIOshell™ 160 Peptide C18 columns are specifically engineered to provide efficient separation of peptides as well as small proteins. These columns contain advanced Fused-Core particles with pores strategically sized to 160 to enable optimized peptide diffusion. This attribute makes these columns an excellent choice for peptide mapping. Additionally, the sterically-protected C18 ligands provide extra stability allowing the columns to be used at an extended pH range (2-9) and high temperatures (up to 90 °C). This greatly expands the application range for the separation of biomolecules.Recommended productsDiscover LiChropur reagents ideal for HPLC or LC-MS analysisLegal InformationBIOshell is a trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material stainless steel hardware (column) Agency/Method suitable for USP L1 description Shell thickness (0.6 µm), Solid Core (3.5 µm) feature endcapped: no analyte chemical class(es) peptides Торговая марка BIOshell™ extent of labeling 4.0% carbon loading parameter 600 bar max. pressure, 90 °C max. temp. application(s) HPLC: suitable L x I.D. 5 cm x 75 µm surface coverage 2.2 µmol/m2 matrix particle platform matrix active group C18 (octadecyl) phase particle size 5.0 µm pore size 160 A surface area 60 m2/g operating pH range 1 - 8 separation technique reversed phase Узнать цену -
BIOshell™ A160 Peptide C18, 5 m HPLC Column 67202-U
NACRES: SB.52 General descriptionBIOshell™ 160 Peptide C18 columns are specifically engineered to provide efficient separation of peptides as well as small proteins. These columns contain advanced Fused-Core particles with pores strategically sized to 160 to enable optimized peptide diffusion. This attribute makes these columns an excellent choice for peptide mapping. Additionally, the sterically-protected C18 ligands provide extra stability allowing the columns to be used at an extended pH range (2-9) and high temperatures (up to 90 °C). This greatly expands the application range for the separation of biomolecules.Recommended productsDiscover LiChropur reagents ideal for HPLC or LC-MS analysisLegal InformationBIOshell is a trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material stainless steel hardware (column) Agency/Method suitable for USP L1 description Shell thickness (0.6 µm), Solid Core (3.5 µm) feature endcapped: no analyte chemical class(es) peptides Торговая марка BIOshell™ extent of labeling 4.0% carbon loading parameter 600 bar max. pressure, 90 °C max. temp. application(s) HPLC: suitable L x I.D. 15 cm x 75 µm surface coverage 2.2 µmol/m2 matrix particle platform matrix active group C18 (octadecyl) phase particle size 5.0 µm pore size 160 A surface area 60 m2/g operating pH range 1 - 8 separation technique reversed phase Узнать цену -
BIOshell™ A160 Peptide C18, 5 m HPLC Column 67203-U
NACRES: SB.52 General descriptionBIOshell™ 160 Peptide C18 columns are specifically engineered to provide efficient separation of peptides as well as small proteins. These columns contain advanced Fused-Core particles with pores strategically sized to 160 to enable optimized peptide diffusion. This attribute makes these columns an excellent choice for peptide mapping. Additionally, the sterically-protected C18 ligands provide extra stability allowing the columns to be used at an extended pH range (2-9) and high temperatures (up to 90 °C). This greatly expands the application range for the separation of biomolecules.Recommended productsDiscover LiChropur reagents ideal for HPLC or LC-MS analysisLegal InformationBIOshell is a trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material stainless steel hardware (column) Agency/Method suitable for USP L1 description Shell thickness (0.6 µm), Solid Core (3.5 µm) feature endcapped: no analyte chemical class(es) peptides Торговая марка BIOshell™ extent of labeling 4.0% carbon loading parameter 600 bar max. pressure, 90 °C max. temp. application(s) HPLC: suitable L x I.D. 5 cm x 100 µm surface coverage 2.2 µmol/m2 matrix particle platform matrix active group C18 (octadecyl) phase particle size 5.0 µm pore size 160 A surface area 60 m2/g operating pH range 1 - 8 separation technique reversed phase Узнать цену -
BIOshell™ A160 Peptide C18, 5 m HPLC Column 67204-U
NACRES: SB.52 General descriptionBIOshell™ 160 Peptide C18 columns are specifically engineered to provide efficient separation of peptides as well as small proteins. These columns contain advanced Fused-Core particles with pores strategically sized to 160 to enable optimized peptide diffusion. This attribute makes these columns an excellent choice for peptide mapping. Additionally, the sterically-protected C18 ligands provide extra stability allowing the columns to be used at an extended pH range (2-9) and high temperatures (up to 90 °C). This greatly expands the application range for the separation of biomolecules.Recommended productsDiscover LiChropur reagents ideal for HPLC or LC-MS analysisLegal InformationBIOshell is a trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material stainless steel hardware (column) Agency/Method suitable for USP L1 description Shell thickness (0.6 µm), Solid Core (3.5 µm) feature endcapped: no analyte chemical class(es) peptides Торговая марка BIOshell™ extent of labeling 4.0% carbon loading parameter 600 bar max. pressure, 90 °C max. temp. application(s) HPLC: suitable L x I.D. 15 cm x 100 µm surface coverage 2.2 µmol/m2 matrix particle platform matrix active group C18 (octadecyl) phase particle size 5.0 µm pore size 160 A surface area 60 m2/g operating pH range 1 - 8 separation technique reversed phase Узнать цену -
BIOshell™ A160 Peptide C18, 5 m HPLC Column 67205-U
NACRES: SB.52 General descriptionBIOshell™ 160 Peptide C18 columns are specifically engineered to provide efficient separation of peptides as well as small proteins. These columns contain advanced Fused-Core particles with pores strategically sized to 160 to enable optimized peptide diffusion. This attribute makes these columns an excellent choice for peptide mapping. Additionally, the sterically-protected C18 ligands provide extra stability allowing the columns to be used at an extended pH range (2-9) and high temperatures (up to 90 °C). This greatly expands the application range for the separation of biomolecules.Recommended productsDiscover LiChropur reagents ideal for HPLC or LC-MS analysisLegal InformationBIOshell is a trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material stainless steel hardware (column) Agency/Method suitable for USP L1 description Shell thickness (0.6 µm), Solid Core (3.5 µm) feature endcapped: no analyte chemical class(es) peptides Торговая марка BIOshell™ extent of labeling 4.0% carbon loading parameter 600 bar max. pressure, 90 °C max. temp. application(s) HPLC: suitable L x I.D. 5 cm x 200 µm surface coverage 2.2 µmol/m2 matrix particle platform matrix active group C18 (octadecyl) phase particle size 5.0 µm pore size 160 A surface area 60 m2/g operating pH range 1 - 8 separation technique reversed phase Узнать цену -
BIOshell™ A160 Peptide C18, 5 m HPLC Column 67206-U
NACRES: SB.52 General descriptionBIOshell™ 160 Peptide C18 columns are specifically engineered to provide efficient separation of peptides as well as small proteins. These columns contain advanced Fused-Core particles with pores strategically sized to 160 to enable optimized peptide diffusion. This attribute makes these columns an excellent choice for peptide mapping. Additionally, the sterically-protected C18 ligands provide extra stability allowing the columns to be used at an extended pH range (2-9) and high temperatures (up to 90 °C). This greatly expands the application range for the separation of biomolecules.Recommended productsDiscover LiChropur reagents ideal for HPLC or LC-MS analysisLegal InformationBIOshell is a trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material stainless steel hardware (column) Agency/Method suitable for USP L1 description Shell thickness (0.6 µm), Solid Core (3.5 µm) feature endcapped: no analyte chemical class(es) peptides Торговая марка BIOshell™ extent of labeling 4.0% carbon loading parameter 600 bar max. pressure, 90 °C max. temp. application(s) HPLC: suitable L x I.D. 15 cm x 200 µm surface coverage 2.2 µmol/m2 matrix particle platform matrix active group C18 (octadecyl) phase particle size 5.0 µm pore size 160 A surface area 60 m2/g operating pH range 1 - 8 separation technique reversed phase Узнать цену -
BIOshell™ A160 Peptide C18, 5 m HPLC Column 67207-U
NACRES: SB.52 General descriptionBIOshell™ 160 Peptide C18 columns are specifically engineered to provide efficient separation of peptides as well as small proteins. These columns contain advanced Fused-Core particles with pores strategically sized to 160 to enable optimized peptide diffusion. This attribute makes these columns an excellent choice for peptide mapping. Additionally, the sterically-protected C18 ligands provide extra stability allowing the columns to be used at an extended pH range (2-9) and high temperatures (up to 90 °C). This greatly expands the application range for the separation of biomolecules.Recommended productsDiscover LiChropur reagents ideal for HPLC or LC-MS analysisLegal InformationBIOshell is a trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material stainless steel hardware (column) Agency/Method suitable for USP L1 description Shell thickness (0.6 µm), Solid Core (3.5 µm) feature endcapped: no analyte chemical class(es) peptides Торговая марка BIOshell™ extent of labeling 4.0% carbon loading parameter 600 bar max. pressure, 90 °C max. temp. application(s) HPLC: suitable L x I.D. 5 cm x 300 µm surface coverage 2.2 µmol/m2 matrix particle platform matrix active group C18 (octadecyl) phase particle size 5.0 µm pore size 160 A surface area 60 m2/g operating pH range 1 - 8 separation technique reversed phase Узнать цену -
BIOshell™ A160 Peptide C18, 5 m HPLC Column 67208-U
NACRES: SB.52 General descriptionBIOshell™ 160 Peptide C18 columns are specifically engineered to provide efficient separation of peptides as well as small proteins. These columns contain advanced Fused-Core particles with pores strategically sized to 160 to enable optimized peptide diffusion. This attribute makes these columns an excellent choice for peptide mapping. Additionally, the sterically-protected C18 ligands provide extra stability allowing the columns to be used at an extended pH range (2-9) and high temperatures (up to 90 °C). This greatly expands the application range for the separation of biomolecules.Recommended productsDiscover LiChropur reagents ideal for HPLC or LC-MS analysisLegal InformationBIOshell is a trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material stainless steel hardware (column) Agency/Method suitable for USP L1 description Shell thickness (0.6 µm), Solid Core (3.5 µm) feature endcapped: no analyte chemical class(es) peptides Торговая марка BIOshell™ extent of labeling 4.0% carbon loading parameter 600 bar max. pressure, 90 °C max. temp. application(s) HPLC: suitable L x I.D. 15 cm x 300 µm surface coverage 2.2 µmol/m2 matrix particle platform matrix active group C18 (octadecyl) phase particle size 5.0 µm pore size 160 A surface area 60 m2/g operating pH range 1 - 8 separation technique reversed phase Узнать цену -
BIOshell™ A160 Peptide C18, 5 m HPLC Column 67209-U
NACRES: SB.52 General descriptionBIOshell™ 160 Peptide C18 columns are specifically engineered to provide efficient separation of peptides as well as small proteins. These columns contain advanced Fused-Core particles with pores strategically sized to 160 to enable optimized peptide diffusion. This attribute makes these columns an excellent choice for peptide mapping. Additionally, the sterically-protected C18 ligands provide extra stability allowing the columns to be used at an extended pH range (2-9) and high temperatures (up to 90 °C). This greatly expands the application range for the separation of biomolecules.Recommended productsDiscover LiChropur reagents ideal for HPLC or LC-MS analysisLegal InformationBIOshell is a trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material stainless steel hardware (column) Agency/Method suitable for USP L1 description Shell thickness (0.6 µm), Solid Core (3.5 µm) feature endcapped: no analyte chemical class(es) peptides Торговая марка BIOshell™ extent of labeling 4.0% carbon loading parameter 600 bar max. pressure, 90 °C max. temp. application(s) HPLC: suitable L x I.D. 5 cm x 500 µm surface coverage 2.2 µmol/m2 matrix particle platform matrix active group C18 (octadecyl) phase particle size 5.0 µm pore size 160 A surface area 60 m2/g operating pH range 1 - 8 separation technique reversed phase Узнать цену -
BIOshell™ A160 Peptide C18, 5 m HPLC Column 67212-U
NACRES: SB.52 General descriptionBIOshell™ 160 Peptide C18 columns are specifically engineered to provide efficient separation of peptides as well as small proteins. These columns contain advanced Fused-Core particles with pores strategically sized to 160 to enable optimized peptide diffusion. This attribute makes these columns an excellent choice for peptide mapping. Additionally, the sterically-protected C18 ligands provide extra stability allowing the columns to be used at an extended pH range (2-9) and high temperatures (up to 90 °C). This greatly expands the application range for the separation of biomolecules.Recommended productsDiscover LiChropur reagents ideal for HPLC or LC-MS analysisLegal InformationBIOshell is a trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material stainless steel hardware (column) Agency/Method suitable for USP L1 description Shell thickness (0.6 µm), Solid Core (3.5 µm) feature endcapped: no analyte chemical class(es) peptides Торговая марка BIOshell™ extent of labeling 4.0% carbon loading parameter 600 bar max. pressure, 90 °C max. temp. application(s) HPLC: suitable L x I.D. 15 cm x 500 µm surface coverage 2.2 µmol/m2 matrix particle platform matrix active group C18 (octadecyl) phase particle size 5.0 µm pore size 160 A surface area 60 m2/g operating pH range 1 - 8 separation technique reversed phase Узнать цену -
BIOshell™ A160 Peptide C18, 5 m HPLC Column 67215-U
NACRES: SB.52 General descriptionBIOshell™ 160 Peptide C18 columns are specifically engineered to provide efficient separation of peptides as well as small proteins. These columns contain advanced Fused-Core particles with pores strategically sized to 160 to enable optimized peptide diffusion. This attribute makes these columns an excellent choice for peptide mapping. Additionally, the sterically-protected C18 ligands provide extra stability allowing the columns to be used at an extended pH range (2-9) and high temperatures (up to 90 °C). This greatly expands the application range for the separation of biomolecules.Recommended productsDiscover LiChropur reagents ideal for HPLC or LC-MS analysisLegal InformationBIOshell is a trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material stainless steel hardware (column) Agency/Method suitable for USP L1 description Shell thickness (0.6 µm), Solid Core (3.5 µm) feature endcapped: no analyte chemical class(es) peptides Торговая марка BIOshell™ extent of labeling 4.0% carbon loading parameter 600 bar max. pressure, 90 °C max. temp. application(s) HPLC: suitable L x I.D. 5 cm x 1 mm surface coverage 2.2 µmol/m2 matrix particle platform matrix active group C18 (octadecyl) phase particle size 5.0 µm pore size 160 A surface area 60 m2/g operating pH range 1 - 8 separation technique reversed phase Узнать цену -
BIOshell™ A160 Peptide C18, 5 m HPLC Column 67219-U
NACRES: SB.52 General descriptionBIOshell™ 160 Peptide C18 columns are specifically engineered to provide efficient separation of peptides as well as small proteins. These columns contain advanced Fused-Core particles with pores strategically sized to 160 to enable optimized peptide diffusion. This attribute makes these columns an excellent choice for peptide mapping. Additionally, the sterically-protected C18 ligands provide extra stability allowing the columns to be used at an extended pH range (2-9) and high temperatures (up to 90 °C). This greatly expands the application range for the separation of biomolecules.Recommended productsDiscover LiChropur reagents ideal for HPLC or LC-MS analysisLegal InformationBIOshell is a trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material stainless steel hardware (column) Agency/Method suitable for USP L1 description Shell thickness (0.6 µm), Solid Core (3.5 µm) feature endcapped: no analyte chemical class(es) peptides Торговая марка BIOshell™ extent of labeling 4.0% carbon loading parameter 600 bar max. pressure, 90 °C max. temp. application(s) HPLC: suitable L x I.D. 15 cm x 1 mm surface coverage 2.2 µmol/m2 matrix particle platform matrix active group C18 (octadecyl) phase particle size 5.0 µm pore size 160 A surface area 60 m2/g operating pH range 1 - 8 separation technique reversed phase Узнать цену
Получите коммерческое предложение в течение 1 часа
Менеджер подготовит коммерческое предложение и позвонит, если понадобится уточнить детали вашего заказа
Анна Гловацкая
Менеджер по работе с клиентами
С 2010 года мы поставляем оборудование с заводов Европы. Берем на себя все — от подбора оборудования до внедрения на предприятии
Все сотрудники имеют высшее образование, закончили ведущие химические вузы страны, такие как РХТУ им Менделеева.
У большинства компаний срок ожидания составляет 10-12 недель.
Оборудование хранится на сухом отапливаемом складе, где поддерживается ровная температура.
Работаем с PonyExpress и Деловыми линиями. Вы также можете выбрать свою транспортную компанию или забрать товар со склада в Москве.
В случае любых неполадок за свой счет выполним ремонт в сервисном центре или на заводе-изготовителе. Или бесплатно заменим прибор на новый.
Производим пуско-наладку оборудования, валидацию, обучение сотрудников. Если нужно, привлекаем инженеров с заводов- изготовителей.
